719228
10
Zoom out
Zoom in
Previous page
1/56
Next page
10 / 56 English
EN FR NL
Écran LCD
3
1 Timer
2 Clock indicator: ashes dur-
ing electro-stimulation
3 EMS mode
4 Intensity of channel 1
5 Channel 1 symbol
6 Chanel 1 electrodes indicator :
ashes if the channel 1 electrodes
are incorrectly positioned
7 Programme number
8 TENS mode
9 Intensity of channel 2
10 Channel 2 symbol
11 Chanel 2 electrodes indicator :
ashes if the channel 2 electrodes
are incorrectly positioned
12 Battery indicator: ashes when the
batteries need to be replaced
INSTRUCTIONS FOR USE
Batteries
Insertion
The Medi Stim runs on  AAA .V batteries
(not supplied) Before using your device, in-
sert them correctly into the compartment
provided [
4].
1 Remove the cover of the battery
compartment of the device.
2 Insert 3 AAA 1.5 batteries (not
supplied) into the compartment,
making sure they are installed cor-
rectly using the polarity symbols.
3 Firmly close the compartment again.
Checking and replacing the batteries
The batteries will need to be replaced after a
certain length of time in order to ensure the
device continues to run safely. The battery in-
dicator on the screen will ash when the power
supply is too low [
3
12].
Electrodes
Connecting the electrodes
to the cables
Before switching on your device, connect the
power supply cable to the electrodes. Insert
the connector cable into the electrode’s con-
nector. Make sure they are connected correctly
in order to ensure the device performs well by
referring to [
5].
Connection to the device’s cables
The cables can only be connected when the
device is switched o. Insert the cables into
the jacks located on the top of the device
[
2]. There our two output channels: you can
choose to use one or two of them. Using both
of them means that you can stimulate two ar-
eas at the same time.
Replacing them
The electrodes are intended to be used up to
 times. Order new electrodes from the same
supplier as the device or one of its distributors
in order to ensure quality.
Positioning them
Remove the protective lm and keep it. Do not
put the electrodes on irritated or damaged
skin. You should also check that your skin is
clean and dry.
Stick the patches on rmly and make sure that
there is sucient contact between the skin
and the electrodes.
To obtain the desired eect from stimulation, it
is important that the electrodes are positioned
carefully. We would advise you to dene the
best positions of the electrodes in the area
E-IM-MediStim-001.indd 10 19/12/2017 14:45:35
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lanaform LA100207 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lanaform LA100207 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info