719228

Lanaform LA100207 Manual

9
Zoom out
Zoom in
Previous page
1/56
Next page
English 9 / 56
EN FR NL
biphasic pulses. The digital TENS/EMS only has
biphasic pulse currents because they relieve
muscles in order to reduce muscle fatigue and
ensure safe use.
Frequency of pulses
The frequency indicates the number of pulses
per second. It is displayed in Hz (Hertz). It de-
termines the types of muscle bres responding
as a priority. The slow-responding bres react
instead to the low pulse frequencies up to  Hz
whereas the rapid-response bres only react
from about  Hz.
In the presence of pulses between approxi-
mately  and  Hz, the muscles contract
continually and quickly tire. The higher pulse
frequencies can therefore be used as a prior-
ity for rapid strength training and maximum
strength training.
Width of pulses
It indicates the length of a pulse in microsec-
onds. The width of pulses also determines
the depth of penetration of the current. The
following rule therefore generally applies : the
bigger the muscle mass, the wider the pulses.
Pulse intensity
Setting the level of intensity depends on the
subjective impact of each user and is deter-
mined by the number of parameters such as
the area of application, skin irritation, skin
thickness and the quality of contact with the
electrodes. Convenient control must be eec-
tive but should never produce unpleasant sen-
sations such as, for example, pain at the appli-
cation site. Whereas a slight tingling indicates
that the energy from stimulation is sucient,
any setting that causes pain must be avoided.
In the event of prolonged use, adjustment may
be necessary due to the adjustment processes
over time at the application site.
Variation in the pulse
parameters controlled
by the cycle
In some cases, all the tissue structures must
be covered at the application site by using
several pulse parameters. On the digital TENS/
EMS, the existing programmes automatically
undergo a cyclical modication of the pulse
parameters. This also has a preventive eect
on the fatigue of the various muscle groups
at the application site. The digital TENS/EMS
includes logical pre-setting of the current’s
parameters. You have the option, however, of
modifying the intensity of the pulses at any
time when using it.
DESCRIPTION OF THE DEVICE
Front panel
1
1 LCD screen
2 Increase in the intensity of channel 1
3
o n/off
button
4 Reduction in the intensity of channel 1
5 Casing
6 Button for selecting the TENS
function and a TENS programme
7 Increase in the intensity of channel 2
8 Reduction in the intensity of channel 2
9 Button for selecting the EMS func-
tion and an EMS programme
Top
2
1 Output plug for channel 1 : output of
the electrical signal from channel 1 after
connecting the cable and the electrodes.
2 Output plug for channel 2 : output of
the electrical signal from channel 2 after
connecting the cable and the electrodes.
E-IM-MediStim-001.indd 9 19/12/2017 14:45:34
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lanaform LA100207 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lanaform LA100207 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info