435980

Kyocera km 1500 laser 15ppm Manual

19
Zoom out
Zoom in
Previous page
1/76
Next page
Section 2 NAMES OF PARTS
2-5
(15) Program key & indicator
(Press this key when you want to copy with the Program
function. Make sure that the Program indicator is lit green.)
(16) Add Toner indicator
(This indicator lights red when the toner supply has run low.
See page 8-2.)
(17) Memory Overflow indicator
(This indicator lights red if the memory becomes full during
scanning of originals. See page 7-1.)
(18) Upper drawer indicator
(This indicator lights green when the upper drawer is selected
as the source of paper feed and it flashes green when the
drawer has run out of paper.)
(19) Upper drawer misfeed indicator
(This indicator lights red if a paper jam occurs in the upper
drawer.)
(20) Paper Feeder indicator
(This indicator lights green when the optional Paper Feeder is
selected as the source of paper feed and it flashes green when
the drawer has run out of paper.)
(21) Paper Feeder misfeed indicator
(This indicator lights red if a paper jam occurs in the optional
Paper Feeder.)
(22) Multi-bypass tray indicator
(This indicator lights green when the multi-bypass tray is
selected as the source of paper feed and it flashes green when
the tray has run out of paper.)
(23) Multi-bypass tray misfeed indicator
(This indicator lights red if a paper jam occurs in the
multi-bypass tray.)
(24) Document Processor indicator
(This indicator will light red if an original jam occurs.)
Initial mode (the state that the copier enters at the end of
warm-up or when the Reset/Power key is pressed)
The upper drawer is selected as the source for paper feed, the
number of copies to be made is set to “1” and “Text & Photo” is
selected as the image quality mode.
* If the optional Paper Feeder is installed on your copier, it is
possible for you to change which drawer will be automatically
selected in the initial mode.
* It is also possible for you to change which image quality mode
will be automatically selected in the initial mode.
Auto Clear function
A pre-set number of seconds (between 10 and 270) after copying
stops, the Auto Clear function will automatically engage and the
copier will return to the same settings as those after warm up
(initial mode settings).(However, the copy exposure setting will not
change.) Copies can continually be made using the same settings
(copy mode and number of copies) if the next batch of copying is
started before the Auto Clear function engages.
Auto Drawer Switching function
If two drawers contain the same size of paper and the paper in one
drawer runs out during copying, the Auto Drawer Switching
function will switch paper feed from the empty drawer to the other
drawer that still contains paper so that copying can continue
non-stop.
* The optional Paper Feeder is required in order to use the Auto
Drawer Switching function.
* It is possible for you to turn the Auto Drawer Switching function
OFF.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera km 1500 laser 15ppm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera km 1500 laser 15ppm in the language / languages: English as an attachment in your email.

The manual is 5,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info