435980

Kyocera km 1500 laser 15ppm Manual

18
Zoom out
Zoom in
Previous page
1/76
Next page
Section 2 NAMES OF PARTS
2-4
(1) Start key & indicator
(Press this key when you want to start copying. Copying will
begin immediately if you press this key when the indicator is
lit green.)
(2) Reset/Power key
(Press this key when you want to cancel the currently entered
setting(s) and return to those registered for the initial mode.
Press down on this key for at least 3 seconds when you want to
engage the Off mode. When you want to release the copier
from the Off mode, press any one of the keys on the operation
panel. See page 2-5.)
(3) Stop/Clear key
(Press this key when you want to stop copying. Press down on
this key for at least 3 seconds when you want to view the total
copy count. See page 6-10.)
(4) Copy quantity/magnification display
(Displays the number of copies to be made or the currently
selected magnification ratio. When the “%” symbol is lit, the
displayed number is the currently selected magnification
ratio.)
(5) Exposure adjustment keys
(Press the left key when you want to make the copy exposure
lighter and the right key to make the exposure darker. Press
down on both keys at the same time for at least 3 seconds
when you want to access the default settings mode.)
(6) Image quality select key
(Press this key when you want to select the desired image
quality mode. See page 4-1.)
(7) Number of Copies / Zoom(+) key
(Press this key when you want to raise the number of copies to
be made, as well as to increase the currently selected copy
magnification ratio. Press this key as well during default
settings in order to select the desired default item or setting.)
(8) Number of Copies / Zoom(-) key
(Press this key when you want to lower the number of copies
to be made, as well as to decrease the currently selected copy
magnification ratio. Press this key as well during default
settings in order to select the desired default item or setting.)
(9) Recall%/Enter key
(Press this key when you want copy in the Zoom mode. Press
this key as well during default settings in order to select the
current default item or register the currently displayed
setting. See page 4-4.)
(10) Reduce/Enlarge key
(Press this key when you want to use the Preset Zoom mode.
See page 4-5.)
(11) Paper Select key
(Press this key when you want to switch paper feed between
the drawer(s) and the multi-bypass tray. The indicator for the
currently selected source of paper feed will be lit green. Press
down on this key for at least 3 seconds when you want to
access the default items for paper size selection. See page 4-1.)
(12) Thick Paper key & indicator
(Press this key when you want to copy onto thick paper. Make
sure that the Thick Paper indicator is lit green. See page 3-9.)
(13) 2in1/4in1 key & indicators
(Press this key when you want to copy with the Layout modes.
Make sure that the 2in1 or the 4in1 indicator, as appropriate,
is lit green. Press down on this key for at least 3 seconds when
you want to access the default items for the Layout modes. See
page 5-1 for more information on the Layout modes.)
(14) Sort key & indicator
(Press this key when you want to copy with the Sort mode.
Make sure that the Sort indicator is lit green. See page 5-9.)
Operation panel
(1)
(2)
(3)
(14)
(15)
(10)(7)(9)(8)(11)(5)(6)
(13)
(16)
(4)(17)(12)
(24)
(23)
(19)
(21)
(22)
(18)
(20)
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera km 1500 laser 15ppm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera km 1500 laser 15ppm in the language / languages: English as an attachment in your email.

The manual is 5,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info