435980
9
Zoom out
Zoom in
Previous page
1/76
Next page
1-3
PRECAUTIONS FOR USE
Cautions when using the copier
WARNING
DO NOT place metallic objects or containers
with water (flower vases, flower pots, cups,
etc.) on or near the copier. This of situation
presents a danger of fire or electrical shock
should they fall inside. ..................................
DO NOT remove any of the covers from the
copier as there is a danger of electrical shock
from high voltage parts inside the copier. ....
DO NOT damage, break or attempt to repair
the power cord. DO NOT place heavy objects
on the cord, pull it, bend it unnecessarily or
cause any other type of damage.
These types of situations present a danger of
fire or electrical shock. ...................................
NEVER attempt to repair or disassemble the
copier or its parts as there is a danger of fire,
electrical shock or damage to the laser. If the
laser beam escapes, there is a danger of it
causing blindness............................................
If the copier becomes excessively hot, smoke
appears from the copier, there is an odd
smell, or any other abnormal situation
occurs, there is a danger of fire or electrical
shock. Turn the power switch OFF ({)
immediately, BE ABSOLUTELY CERTAIN
to remove the power plug from the outlet and
then contact your service representative. .....
If anything harmful (paper clips, water,
other fluids, etc.) falls into the copier, turn
the power switch OFF ({) immediately.
Next, BE ABSOLUTELY CERTAIN to
remove the power plug from the outlet to
avoid the danger of fire or electrical shock.
Then contact your service representative. ...
DO NOT remove or connect the power plug
with wet hands, as there is a danger of
electrical shock. ..............................................
ALWAYS contact your service representative
for maintenance or repair of internal parts.
CAUTION
DO NOT pull the power cord when removing
it from the outlet. If the power cord is pulled,
the wires may become broken and there is a
danger of fire or electrical shock. (ALWAYS
grasp the power plug when removing the
power cord from the outlet.) .........................
ALWAYS remove the power plug from the
outlet when moving the copier. If the power
cord is damaged, there is a danger of fire or
electrical shock. .............................................
If the copier will not be used for a short
period of time (overnight, etc.), turn the
power switch OFF ({).
If it will not be used for an extended period of
time (vacations, etc.), remove the power plug
from the outlet for safety purposes during
the time the copier is not in use. ..................
ALWAYS hold the designated parts only
when lifting or moving the copier. ................
For safety purposes, ALWAYS remove the
power plug from the outlet when performing
cleaning operations. .......................................
If dust accumulates within the copier, there
is a danger of fire or other trouble. It is
therefore recommended that you consult
with your service representative in regard to
cleaning of internal parts. This is
particularly effective if accomplished prior to
seasons of high humidity. Consult with your
service representative in regard to the cost of
cleaning the internal parts of the copier. .....
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera km 1500 laser 15ppm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera km 1500 laser 15ppm in the language / languages: English as an attachment in your email.

The manual is 5,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info