Manual Kyocera km 1500 laser 15ppm (page 8 of 76) (English)

435980

Zoom out

Zoom in

1/76

1-2

INSTALLATION PRECAUTIONS

Environment

CAUTION

Avoid placing the copier on or in locations

which are unstable or not level. Such

locations may cause the copier to fall down or

fall over. This type of situation presents a

danger of personal injury or damage to the

copier.

.............................................................................

Avoid locations with humidity or dust and

dirt. If dust or dirt become attached to the

power plug, clean the plug to avoid the

danger of fire or electrical shock.

.......................

Avoid locations near radiators, heaters, or

other heat sources, or locations near

flammable items, to avoid the danger of fire.

To keep the copier cool and facilitate

changing of parts and maintenance, allow

access space as shown below. Leave adequate

space, especially around the vents, to allow

air to be properly ventilated out of the copier.

Other precautions

Adverse environmental conditions may affect the safe

operation and performance of the copier. Install in an

air-conditioned room (recommended room

temperature: around 68°F (20°C), humidity: around

65%) and avoid the following locations when selecting

a site for the copier.

• Avoid locations near a window or with exposure to

direct sunlight.

• Avoid locations with vibrations.

• Avoid locations with drastic temperature

fluctuations.

• Avoid locations with direct exposure to hot or cold

air.

• Avoid poorly ventilated locations.

During copying, some ozone is released, but the

amount does not cause any ill effect to one's health. If,

however, the copier is used over a long period of time

in a poorly ventilated room or when making an

extremely large number of copies, the smell may

become unpleasant. To maintain the appropriate

environment for copy work, it is suggested that the

room be properly ventilated.

Power supply/Grounding the copier

WARNING

DO NOT use a power supply with a voltage

other than that specified. Avoid multiple

connections in the same outlet. These types

of situations present a danger of fire or

electrical shock.

.........................................................

Plug the power cord securely into the outlet.

If metallic objects come in contact with the

prongs on the plug, it may cause a fire or

electric shock.

.............................................................

Always connect the copier to an outlet with a

ground connection to avoid the danger of fire

or electrical shock in case of an electric short.

If an earth connection is not possible, contact

your service representative.

................................

Other precautions

Connect the power plug to the closest outlet possible

to the copier.

The power supply cord is used as the main disconnect

device. Ensure that the socket/outlet is

located/installed near the equipment and is easily

accessible.

Handling of plastic bags

WARNING

Keep the plastic bags that are used with the

copier away from children. The plastic may

cling to their nose and mouth causing

suffocation.

..................................................................

Left:

13/16"

30 cm

Front:

3/8"

100 cm

Right:

13/16"

30 cm

Rear:

13/16"

30 cm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera km 1500 laser 15ppm in the language / languages: English as an attachment in your email.

The manual is 5,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kyocera km 1500 laser 15ppm Manual

Product: