20433
35
Zoom out
Zoom in
Previous page
1/143
Next page
Chapter 3 Using the Operator Panel
3-19
Press the 3 or 4 key to display the desired mode. The
display changes as shown below. Press the ENTER
key.
Nibble (high) (default)
AUTO
Normal
High speed
Press the
MENU
key. The message display returns to
Ready.
Q
QQ
Q Changing Serial Interface Modes
You can set the baud rate, data bits, stop bits, parity, and proto-
col for the serial interface.
Press the MENU key.
Press the 3 or 4 key repeatedly until Interface >
appears. One of the interface names shown below ap-
pears, indicating the current interface.
Parallel (default)
Serial
Network
Option (only when an optional network interface
card is installed)
Press the ENTER key. A blinking question mark (?) ap-
pears.
Press the 3 or 4 key repeatedly until Serial ap-
pears.
Press the ENTER key again.
Press the 2 key. Each time the 3 or 4 key is pressed,
the setting item and current setting change as shown
below.
Display the setting item to be changed and press the
ENTER
key. A question mark (?) appears.
The following example explains how to change the
baud rate. The settings for other items can be changed
in a similar manner.
Press the 3 or 4 key to display the desired setting.
The baud rate can be selected from 1200, 2400, 4800,
9600 (default), 19200, 38400, 57600, and 115200.
Some computers may not be compatible with a baud
rate of 115200 bps. If you set the baud rate to 115200
and communication problems occur, lower the baud
rate.
Interface
?Parallel
Interface
?Serial
7
8
1
2
3
4
5
>Baud Rate
9600
Definable baud rates:
1200, 2400, 4800, 9600
(default), 19200,
38400,57600, 115200
>Data Bits
8
Definable stop bits: 7, 8
(default)
>Stop Bits
1
Definable data bits: 1 (de-
fault), 2
>Parity
None
Definable parity: None
(default), Odd, Even, Ig-
nore
>Protocol
DTR(pos.)&XON
Definable protocol: DTR
(pos.) & XON (default),
DTP (positive), DTR (neg-
ative), XON/XOFF, ETX/
ACK
>Barcode Mode
Off
If set to On when the option
barcode reader is installed,
the mode of the serial inter-
face will be the barcode
mode.
>Baud Rate
? 9600
NOTE
6
7
8
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS9500DN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS9500DN in the language / languages: English as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info