20433
34
Zoom out
Zoom in
Previous page
1/143
Next page
Chapter 3 Using the Operator Panel
3-18
Q
QQ
Q Maximum Space Assigned to Virtual Mailboxes (VMB)
This changes the hard disk space for virtual mailboxes. You can
change the maximum space from 0 to 9999 (megabytes). The
actual maximum size depends on the size of free hard disk
space, however. The default size is 1/6 of the total hard disk
space, rounded off in unit of 50 MB. For example, if the total
hard disk space is 3.2 GB, the default size is 500 MB.
Press the MENU key.
Press the 3 or 4 key until e-MPS > appears.
Press the 2 key.
Press the 3 or 4 key and select >e-MPS Configu-
ration >.
Press the 2 key.
Press the 3 or 4 key and select >>VMB Size.
To change the maximum size, press the
ENTER
key.
The message display shows a blinking cursor (_).
Press the 3 or 4 key to increase or decrease, respec-
tively, the value at the blinking cursor. Use the 2 and 1
keys to move the cursor right and left.
When the desired size is displayed, press the ENTER
key.
Press the MENU key to exit the menu selection.
2.2.4 Changing the Interface Parameters
The printer is equipped with both a parallel and serial interface
or a network interface. Various printing environment parameters
such as the default emulation can be changed independently on
different interfaces by using the printer’s menu selection sys-
tem. Select the interface to apply the changes in the procedure
described below.
This interface selection described below does not select which
interface data will be received from. The printer automatically
selects an interface.
Q
QQ
Q Changing Parallel Interface Modes
The parallel interface mode of this printer supports a bi-direction-
al/high-speed mode. Normally, this interface is used under the
default setting Nibble (high). For details, see Appendix C Host
Computer Interface. After setting the interface, be sure to reset
the printer or turn the power off at least once. The new setting
will be enabled thereafter.
Press the MENU key.
Press the 3 or 4 key repeatedly until Interface >
appears. One of the interface names shown below ap-
pears, indicating the current interface.
Parallel (default)
Serial
Network
Option (only when an optional network interface
card is installed)
Press the ENTER key. A blinking question mark (?) ap-
pears.
If Parallel is not displayed, press the 3 or 4 key
repeatedly until Parallel appears.
Press the ENTER key again.
Press the 2 key. The message display changes to the
communication mode menu.
Press the ENTER key. A blinking question mark (?) ap-
pears.
e-MPS >
>e-MPS >
Configuration
>>VMB Size
0500MB
>>VMB Size
050
0MB
1
2
3
4
5
6
7
8
9
10
NOTE
Interface >
?Parallel
>Parallel I/F
?Nibble (high)
1
2
3
4
5
6
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS9500DN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS9500DN in the language / languages: English as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info