20377
84
Zoom out
Zoom in
Previous page
1/110
Next page
Chapter 4 Troubleshooting
4-7
Memory overflow
Press GO
The total amount of data received by the printer exceeds the printer’s internal memory.
Check the memory on the status page and delete unnecessary macros and external fonts or
expand printer memory. See
Chapter 6 Option Units
for details about expansion memory. Press
the GO key to resume printing. You can abandon printing by the CANCEL key.
If Auto Continue is set to On, printing will be automatically resumed after a preset period of time.
See
Setting the Auto Continue on page 1-56
.
MemoryCard err##
Press GO
This message appears when an error occurs during access to the memory card using the
PRESCRIBE RWER command or from the printer’s operator panel.
Look at the error code given in place of ## and see the corresponding description given below.
01: The memory card does not meet specifications. This memory card cannot be used by this
printer. Insert a memory card which can be used by this printer.
02: The memory card is not installed. Recheck the requirements for using the memory card.
04: The capacity of the memory card is insufficient. Clean up files.
05: Specified file not on memory card.
06: No memory for use by memory card. Expand printer memory.
Print overrun
Press GO
The data transferred to the printer was too complex to print on a page.
Press the GO key to resume printing. (The page may break in some pages.)
You can abandon printing by the CANCEL key.
Check the memory on the status page and delete unnecessary macros and external fonts or
expand printer memory. See
Chapter 6 Option Units
for details about expansion memory.
Note:After this message is displayed, page protect mode will be On. To maintain optimum use
of memory during printing, display >Page Protect from the operator panel, and re-
select Auto. See Setting the Page Protect Mode on page 1-51.
If Auto Continue is set to On, printing will be automatically resumed after a preset period of time.
See
Setting the Auto Continue on page 1-56
.
RAM disk error ##
Press GO
Look at the error code given in place of ## and see the corresponding description given below.
01: Format error. Try turning the power off and on again.
02: RAM disk mode is Off. Turn RAM disk mode On. See
Setting the RAM Disk Size on page 1-
50
for details.
04: No disk space. Clean up files.
05: Specified file is not on disk.
06: No memory for use by disk system. Expand printer memory.
Virtual mailbox
full
The storage area for the VMB is full.
Print out accumulated VMB data.
Warning
image adapt
Printing job cannot be done in current resolution because there is not enough internal
memory.
Try adding more memory or changing resolution. See
Chapter 6 Option Units
for details about
expansion memory.
Warning
Low memory
The printer’s internal memory is running low due to the number of fonts and macros downloaded.
Print a status page to see how much user memory is left, and try deleting unnecessary fonts and
macros or adding more memory. See
Chapter 6 Option Units
for details about expansion memory.
:Alarm buzzer sounds when an error occurs. Press the CANCEL key to stop the alarm buzzer.
Message Corrective Action
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS6020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS6020 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info