20377
82
Zoom out
Zoom in
Previous page
1/110
Next page
Chapter 4 Troubleshooting
4-5
Check
process unit
The process unit or toner container is not installed correctly.
Reinstall either of them correctly. See
Toner Container Replacement on page 3-1
.
The printer does not operate when this message is displayed.
Close duplexer
rear cover
The rear cover of the option duplexer is open.
Close the rear cover.
Close
top cover
The top or front cover of the printer is open.
Close the printer top or front cover.
Close rear
cover
The rear cover of the printer is open.
Close the printer rear cover.
Face-down tray
paper full
The face-down tray has become full (approx. 250 pages).
You must remove all printed pages from the face-down tray. When the printer senses that the face-
down tray is empty again, it will continue printing into the face-down tray.
Load Cassette 1(to 5)
(paper size)/(paper type)*
*(paper size) and (paper
type) are displayed flashing
alternately.
There is data for printing that matches with a paper cassette setting (paper size, paper type),
but there is no paper in the paper cassette.
Set paper into the paper source as displayed on the operator panel, and press the GO key to restart
printing. However, the paper cassette numbers (2 to 5) are only displayed when there is an
option paper feeder installed.
Or, if you want to print from a different paper source, press the or key to display Use
alternative? and you can change the source for paper feeding.
After selecting a paper source and pressing the MENU key, Paper Handling > appears. By
pressing the key, the paper type settings menu appears. After setting the correct paper type,
press the ENTER key and printing starts.
Load MP tray
(paper size)/(paper type)*
*(paper size) and (paper
type) are displayed flashing
alternately.
There is no paper cassette set (paper size, paper type) that matches with the data for printing,
so printing is done from the MP tray.
Set paper into the MP tray that matches the paper size and type shown on the display and press
the GO key to restart printing.
Or, if you want to print from a different paper source, press the or key to display Use
alternative? and you can change the source for paper feeding.
After selecting a paper source and pressing the MENU key, Paper Handling > appears. By
pressing the key, the paper type settings menu appears. After setting the correct paper type,
press the ENTER key and printing starts.
Missing
duplexer
The option duplexer is not Installed.
The option duplexer installed has been removed or installed incorrectly.
Re-install the duplexer correctly.
Option interface
Error ##
A failure has occurred with the option network interface card.
Check the option network interface card installed in the printer.
Paper jam
###############
A paper jam has occurred.
Open the printers cover(s) or the paper cassette(s) and correct the paper jam (or paper mis-
feeding in the paper cassette). The location of the paper jam is also indicated in place of the #’s.
Online help messages which are useful for correcting the paper jam will be displayed by pressing
the key. (See
Correcting a Paper Jam on page 4-8
.)
Paper path error Any of the paper cassettes installed above the specified paper source is open.
Close the paper cassette.
Replace toner
TK-400
The printer has stopped due to lack of toner.
Replace the toner container using a new toner kit. The printer does not operate when this
message is displayed. See
Toner Container Replacement on page 3-1
.
Toner low
TK-400
Toner is running low.
Replace the toner container using a new toner kit and upon completion of replacement, clean the
internal parts of the printer. See
Toner Container Replacement on page 3-1
.
: Alarm buzzer sounds when an error occurs. Press the CANCEL key to stop the alarm buzzer.
(Continued on next page)
Message Corrective Action
?
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS6020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS6020 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info