20377
65
Zoom out
Zoom in
Previous page
1/110
Next page
Chapter 1 Using the Operator Panel
1-55
The procedure described below resets the printers tempo-
rary conditions, such as the current unit of measurement,
page orientation, font, character code set, margins, etc., set
by commands to their default values.
Press the MENU key.
Press the or key repeatedly until Others > ap-
pears.
Press the key.
Press the or key repeatedly until >Printer
Reset appears.
Press the ENTER key. A question mark (?) appears.
Press the ENTER key again. Self test appears
while the printer is resetting itself, then Please
wait followed by Ready.
When you switch from the PCL 6 emulation to another, all
downloaded fonts and macros are deleted. In either of the fol-
lowing two resource protection modes, resource protection
preserves these PCL resources in memory so that they are
available as intact when you change the emulation back to
PCL 6.
You can select either of the following two resource protection
modes to enable this function.
Permanent: You can store such permanent PCL resources
as fonts, macros, and symbol sets in the
printers memory when switching to another
emulation.
Perm / Temp: You can store both permanent and temporal
PCL resources in the printer’s memory when
switching to another emulation.
The extension memory should be installed in the printer in ad-
vance to set the resource protection. See Chapter 6 Option
Units.
Press the MENU key.
Press the or key repeatedly until Others > ap-
pears.
Press the key.
Press the or key repeatedly until >Resource
Prot. appears.
Press the ENTER key. A blinking question mark (?)
appears.
Press the or key to display the desired mode.
The display changes as shown below.
Off (default)
Permanent
Perm / Temp
Resetting the Printer
Others >
>Printer Reset
>Printer Reset ?
Self test
Please wait
Ready
1
2
3
4
5
6
Resource Protection
NOTE
Others >
>Resource Prot.
Off
>Resource Prot.
? Off
1
2
3
4
5
6
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS6020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS6020 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info