522406
23
Zoom out
Zoom in
Previous page
1/29
Next page
Appendix
24
5. Secure the data/power and RF cables to the
inside rim of the baseplate, using the two
cable brackets. Secure the brackets in place
using the four M4 screws you removed
earlier (see Figure 47).
6. Attach the supplied cable exit shroud over
the cable access hole inside the baseplate,
using the two M4 screws you removed earlier
from the cover plate (see Figure 48).
Replace the Logo Plate
1. Attach the supplied blank logo plate using six
M4 screws (see Figure 49).
2. Discard the old logo plate, or save it in case
you need to change the cable routing in the
future.
3. The baseplate conversion process is
complete! Complete the remaining system
installation steps starting with Step 6 on
page 8.
Continued Bottom Cable Entry Kit
A
Figure 47 Cables Secured by Brackets
Figure 48 Cable Exit Shroud Installed Over Cables
Figure 49 Blank Logo Plate (No Cable Slots)
M4 Screw (x4)
M4 Screw (x2)
Cable Exit
Shroud
M4 Screw
(x6)
Blank Logo
Plate
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KVH TracVision M9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KVH TracVision M9 in the language / languages: English as an attachment in your email.

The manual is 7,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of KVH TracVision M9

KVH TracVision M9 User Manual - English - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info