735580
10
Zoom out
Zoom in
Previous page
1/20
Next page
CO2 CONTROL - assembly and operating instructions
-10-
Select the mounting point in such a way that a system warning cannot be ignored before entering the danger area.
Please only use sockets and circuits which are constantly in operation and which cannot be
switched on and off as required!
The PA version provides 4 floating outputs for switching. Pre-alarm, main alarm, operation and fault messages can be forwarded.
CO2 CONTROL PA version
Connection and colour layout of the floating outputs
CO2 CONTROL AM / AM PLUS versions
See CO2 CONTROL AM / AM PLUS assembly instructions
2.5 Setting the geographic height
On the side of the warning unit, there is a rotary switch for setting the location height at which the detection system is installed. Ask the operator the height of
the restaurant above sea level. Check this against the height range given in the table and set the position (0...9) of the switch so that the number on the switch is
above the marking on the housing.
Level
Height [m]
above sea level
0
0 .. 250
1
250 .. 500
2
500 .. 750
3
750 .. 1000
4
1000 .. 1250
5
1250 .. 1500
6
1500 .. 1750
7
1750 .. 2000
8
2000 .. 2250
9
2250 .. 2500
An input voltage for the PA outputs of up to
max. 60 VDC / 125 VAC at max. 0.5 A can be
applied.
white: Input 24V AC/DC
grey: Pre-alarm
brown: Main alarm
green: Operation
yellow: Fault
Setting of the
altidude above sea
level according to
the table
After setting the height,
the housing on the rotary
switch must be sealed
with the attached
transparent adhesive film!
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kundo xT CO2 Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kundo xT CO2 Control in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kundo xT CO2 Control

Kundo xT CO2 Control Usermanual and installation guide - German - 54 pages

Kundo xT CO2 Control Usermanual and installation guide - German - 53 pages

Kundo xT CO2 Control Usermanual and installation guide - Dutch - 52 pages

Kundo xT CO2 Control Usermanual and installation guide - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info