639542
68
Zoom out
Zoom in
Previous page
1/78
Next page
53PERIODIC SERVICE
8. Re-install the filter guard (3) with 3 hex head bolts (4).
Torque bolts (4) to 7.35 N-m (5.42 lbf-ft) securely.
9. Remove the oil level check port plug (9) from the
transaxle prior to filling with oil. This will allow the
transaxle to vent during oil fill.
10.Remove the hose (7), the barbed cap (6) and the metal
fitting assembly (5).
11.Fill with 20W50 motor oil until oil just appears at the
bottom of the oil level check port. Install the oil level
check port plug (9) into transaxle. Torque the plug (9)
to 20.34 N-m (15.0 lbf-ft).
12.Install the metal fitting assembly (5) to the transaxle (1)
and torque the metal fitting assembly (5) to 20.34 N-m
(15.0 lbf-ft). Then install the barbed cap (6) and the
hose (7).
13.Proceed to the purge procedure.
BChanging Transaxle Fluid
(See "Replacing Transaxle Filter" in "EVERY 600
HOURS" in "PERIODIC SERVICE" section.)
EVERY 2 YEARS
BReplacing Fuel Lines
This should be done by your local KUBOTA Dealer.
SERVICE AS REQUIRED
BReplacing Fuses
Replacement of the fuse
1. Open hood.
2. Remove the blown fuse.
3. Place a new 3A or 5A fuse in position.
(1) Transaxle
(2) Transaxle oil filter
(3) Filter guard
(4) Hex flange head bolt
(5) Metal fitting assembly
(6) Barbed cap
(7) Hose
(8) Drain plug
(9) Oil level check port plug
(A) FRONT
(B) OIL LEVEL
(1) Fuse location
(2) Slow blow fuse
(3) Fuse location
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota T2380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota T2380 in the language / languages: English as an attachment in your email.

The manual is 5,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info