639542
70
Zoom out
Zoom in
Previous page
1/78
Next page
55PERIODIC SERVICE
A Use the proper size box or socket wrench to tighten or
loosen the blade mounting bolt.
A Black blade to be assembled at discharge deflector
(Black color) side.
Red blade to be assembled at mower deck wall (Red
color) side.
4. To sharpen the blades yourself, clamp the blade
securely in a vise.
Use a large mill file and file along the original bevel
until sharp.
5. To check the blade for balance, place a small rod
through the center hole. If the blade is not balanced,
file the heavy side of the blade until balance is
achieved.
6. To attach blades, be sure to install the cup washer
between the blade and bolt head.
A Make sure that the cup washer is not flattened out or
worn; this may cause blade to slip excessively.
Replace the cup washer if either is damaged.
7. Before checking or replacing the blade, wipe grass
and mud off the top and inside of the mower.
Especially clean up the inside of the belt cover,
because otherwise the belt life will be reduced.
A Tighten the bolt of the all blades from 103 to 118 N-m
of torque. (76 to 87 lbf-ft of torque.)
C Mower belt replacement
1. Remove the mower from the machine.
2. Remove the left and right hand shield from the mower
deck.
3. Clean around the pulleys to remove the belt from the
pulley. Slip the belt over the top of the left side pulley.
4. To install a new belt, reverse the above procedure.
A Tighten cover bolts securely.
(1) Block
(2) Blade (Black)
(3) Blade (Red)
(4) Discharge deflector
(5) Bolt (Right hand thread)
(6) Bolt (Left hand thread)
(A) "LOOSEN"
(1) Spindle holder
(2) Blade
(3) Cup washer
(4) Bolt
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota T2380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota T2380 in the language / languages: English as an attachment in your email.

The manual is 5,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info