635791
83
Zoom out
Zoom in
Previous page
1/98
Next page
63OTHER ADJUSTMENTS AND REPLACEMENTS
C To loosen the tracks, follow following procedure:
To avoid personal injury:
A Do not loosen the grease nipple completely or
too quickly. Otherwise grease under high
pressure in the tension cylinder could squirt
out.
A Make sure that no obstacles, such as stones
are caught in the track. Remove such obstacles
before adjusting the track tension.
1. Loosen the bolt of the cover and remove the cover.
2. Using a socket wrench, loosen the grease nipple a few
turns.
3. When grease oozes out from the thread, rotate the
track and loosen the track in the lifted position (see
illustration).
After adjustment is completed:
Using the socket wrench, tighten the grease nipple.
Tightening torque must be between 1000 to 1100 kgf-cm.
A If the tracks are too tight, wear is increased.
A If the tracks are too loose, the track pads may collide
with the sprocket, wear is increased.
The track may dislocate or come off.
A Clean the track after every use.
A Should the track tension be high due to sticking mud,
lift the track with the help of the boom, arm and bucket,
idle the engine and remove mud from the track,
especially from the openings of the link plate carefully.
CHANGING THE BUCKET
To avoid personal injury:
A When the coupling pins are removed or
installed, chips may come off. Always use
gloves, goggles and a helmet.
A When the change of the equipment must be
performed with the engine running, always
work as a 2-person team.
One person sits in the operator's seat and the
other works on the machine.
A Do not use your fingers to center the holes,
since they may be injured or even cut in case of
sudden or uncontrolled movements.
A Read the manual of the attachment to do a
correct operation safely when other
attachments are installed instead of Kubota
specified bucket.
FUSES
To avoid personal injury:
A When changing fuse, stop the engine and turn
the key in position "STOP".
BReplacing Fuses
1. Remove the cover of the fuse box.
2. Replace the burnt out fuse with a fuse having the same
capacity.
BFuse Capacities and Circuits
5A Room Light 10A Heater Fan
20A Work Light 15A AI Motor
5A Meter Sub
10A Alternator
5A Lock Lever
10A Horn
15A Cigarette Lighter 10A Meter Main
15A Auxiliary 5A Travel Hi-Low
15A Wiper / Washer 5A Relay Source
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota KX91-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota KX91-3 in the language / languages: English as an attachment in your email.

The manual is 11,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info