635791
81
Zoom out
Zoom in
Previous page
1/98
Next page
61OTHER ADJUSTMENTS AND REPLACEMENTS
OTHER ADJUSTMENTS AND REPLACEMENTS
PURGING FUEL SYSTEM
1. Fill up the excavator with fuel.
2. Turn the starter key to the position "RUN".
3. The air in the fuel system will automatically be purged
within one minute.
A If the purging was insufficient, the engine dies right
after starting. In this case repeat steps (2) to (3) again.
ADJUSTMENT OF TRACKS
BRubber Tracks
Tension the tracks as specified:
1. Loosen the bolt (1) and remove the cover (2).
2. Apply grease (4) to the grease nipple (3).
3. Tension the track in the lifted position, so that the
distance "A" (clearance between the center track roller
and the track surface of the track) is 10 to 15 mm (see
illustration) In this case, the track seam is positioned
on the top center between the idler and the sprocket.
To avoid serious injury or death:
A Do not work under the machine in this
condition.
A For your safety do not rely on hydraulically
supported devices, they may leak down and
suddenly drop or be accidentally lowered.
(1) Starter switch (A) "STOP"
(B) "RUN"
(C) "START"
(1) Bolt
(2) Cover
(3) Grease nipple
(4) Grease gun (Option)
(1) Seam (Mark " ")
(A) 10 to 15 mm
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota KX91-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota KX91-3 in the language / languages: English as an attachment in your email.

The manual is 11,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info