Manual Krups YY3069 - Espresseria (page 24 of 187) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

700530

Zoom out

Zoom in

1/187

ENGLISH

now prepared your appliance. The drink select menu will be displayed.

Put two cups under the coffee outlets. You can lower or raise the coffee outlets to suit the

size of your cups.- Fig. 17. Select your drink and conrm by clicking twice on the OK key.

A message will appear to tell you that you have chosen two cups.

The appliance will automatically sequence 2 complete coffee-making cycles.

PREPARING HOT WATER

While the screen displays the drink selection menu, press the “hot water” key .

A message will invite you to place a container under the steam nozzle. Again press the “hot

water” key to produce hot water - Fig. 14.

To interrupt the steam function, just press any key.

If the nozzle is blocked, clean it out with a ne needle.

The maximum amount of hot water per cycle is limited to 300 ml.

PREPARING STEAM

Steam froths up the milk to make a cappuccino or a caffe latte, for example, and also heats

up liquids. As you need a higher temperature to produce steam than to make an espresso,

the appliance runs an additional pre-heating phase for steam.

While the screen displays the drink selection menu, press the “steam” key - Fig. 18. A

screen will inform you that the appliance is being pre-heated. Once the pre-heating phase

has been completed, a message will ask you to place a container under the steam nozzle

- Fig. 5. Press the “steam” key again to start generating steam. A little water will be

produced rst and then steam will start. Use the same key to stop steam generation.

BE CAREFUL, BECAUSE THE CYCLE DOES NOT STOP IMMEDIATELY.

Frothing milk

We recommend that you use pasteurised or UHT milk that has been recently opened.

Do not use untreated milk. After the steam function has been used, the nozzle will be

hot, and we recommend that you wait for a few moments before handling it.

Check that the steam nozzle is correctly tted - Fig. 19.

Pour the milk into your milk jug. Only half ll it. Immerse the nozzle in the milk - Fig. 20.

Press the “steam” key and follow the instructions on the screen.

Once your milk is frothy enough… - Fig. 21, again press the “steam” key to stop the

cycle. Be careful, because the cycle does not stop immediately.

To remove any remaining milk from the steam nozzle, place a container under the nozzle

and press the “steam” key . Let the hot water escape for at least 10 seconds and then

again press the “steam” key to stop water.

You can remove the steam nozzle for thorough cleaning. Wash it using a brush with water

and a little non-abrasive washing up liquid. Rinse and dry it - Fig. 22-23. Before re-tting,

make certain that the air inlet holes are not clogged by milk residues. Clean out the holes

with a needle if necessary - Fig. 24.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups YY3069 - Espresseria in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups YY3069 - Espresseria Manual

Product: