700530

Krups YY3069 - Espresseria Manual

26
Zoom out
Zoom in
Previous page
1/187
Next page
21
ENGLISH
To perform the cleaning program, you will need a container with minimum capacity of 0.6
litres and a KRUPS (XS 3000) cleaning tablet.
If your machine is unplugged when cleaning or if there is a power cut, the cleaning
programme will re-start at the step in progress when the incident occurred. You will
not be able to postpone this operation. This is essential due to water system rinsing
reasons. In this case, a new cleaning tablet may be required. Be sure to complete
the entire cleaning cycle to avoid any risk of irritation (seek medical advice if cleaning
solutions are accidently swallowed). The cleaning cycle is a continuous cycle and the
pump can be heard intermittently. Do not put your hands under the coffee outlets
during the cycle.
Press the key to start the automatic cleaning program when the “Cleaning needed”
message is displayed. Just follow the instructions shown on the screen.
The automatic cleaning program is in 2 parts – the cleaning cycle itself, then 1 rinsing cycle.
This program lasts about 13 minutes. Press to perform cleaning at any time and then
choose MAINTENANCE => OK => CLEANING from the menus displayed.
Only use KRUPS (XS3000) cleaning tablets. We cannot be held responsible for any damage
that may result from the use of tablets from other brands.
You can obtain cleaning tablets from KRUPS Service Centres.
Automatic scale removal program – total duration: about 20 minutes
If your product is equipped with our Claris - Aqua Filter System cartridge F088 - Please
remove this cartridge during the descaling operation.
The quantity of scale deposited depends on the hardness of the water used. The appliance
will automatically warn you with a message when you need to proceed with scale removal.
To perform the cleaning program, you will need a container with minimum capacity of 0.6
litres and a KRUPS F 054 (40 g) cleaning sachet.
Press the key to start the automatic cleaning program when the “Scale removal
needed” message is displayed. Just follow the instructions shown on the screen, making
sure the sachet dissolves fully.
The scale removal program is in three parts – the scale removal cycle itself, then 2 rinsing
cycles.
Only use KRUPS scale removal products. You can obtain scale removal products from
KRUPS Service Centres. The manufacturer may not be held responsible for damage to the
appliance through use of other products.
If a power cut occurs during the cycle or if you unplug your machine, the cycle will
re-start at the step in progress when the incident occurred, without the option of
postponing this operation.
Be sure to complete the entire scale removal cycle to avoid any risk of intoxication. The
scale removal cycle is a continuous cycle and the pump can be heard intermittently. Do not
put your hands under the coffee outlets during the cycle.
Make certain to protect your work surface during scale removal cycles, especially if
they are made of marble, stone or wood.
General maintenance
Always remove the power supply cord from the socket and let your appliance cool down
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups YY3069 - Espresseria at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups YY3069 - Espresseria in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info