700530

Krups YY3069 - Espresseria Manual

22
Zoom out
Zoom in
Previous page
1/187
Next page
17
ENGLISH
Do not fill the water tank with hot water, milk or any other liquid. If you turn on the
appliance when the water tank is not in place or not correctly lled (under the “min.”
level,), the “ll water tank” light will come on and making an espresso or a cup of coffee
will be made impossible.
First use / setting up the appliance
Use the rotating button to select a function, increase or reduce values. Conrm your choice
using the OK key.
Press “On / Off” to turn your appliance on. Follow the instructions that appear on the “choice
of language” screen - Fig. 10. Use the rotating button - Fig. 11, to choose a language
(highlighted) - Fig. 12.
Press the OK key to validate - Fig. 13.
When you rst use your appliance, it will ask you to set several parameters. If you unplug
your appliance, you will again be asked for some of these parameters.
The appliance will ask you to set:
Language You can select your chosen language from those offered.
Measurement unit Choose either ml or oz as your measurement unit.
Date You must set the date.
Clock You can choose between 12 hour or 24 hour time display.
Auto-off You can choose the period after which your appliance will stop
automatically.
Auto-on You can automatically start pre-heating of your appliance at your
chosen time.
Water hardness You must set your water hardness between 0 and 4. See “Water
hardness measurement” section.
Filter You must indicate whether a lter is tted or not (Claris – Aqua
Filter System cartridge)
When being used for the rst time, it is possible that the machine will ask to be lled up. Just
follow the instructions on the screen.
Rinsing of circuits
Rinsing out the coffee circuit :
Once you have turned the machine on and the preheating stage has completed, you can
rinse out the coffee circuit. Place a container under the coffee outlets then select “YES”
from the menu proposed.
Rinsing out the steam circuit :
Place a container under the steam nozzle. Press the key to rinse the steam circuit -
Fig.14. The rinsing cycle will stop automatically after the volume of water displayed has
owed through.
Press at any time to display menus to perform rinsing and then select MAINTENANCE
=> OK => RINSING.
It is best to perform rinsing after the appliance has remained unused for several days.
WHEN RINSING PROCESS IS IN PROGRESS, HOT WATER COMES OUT THROUGH
THE NOZZLES. BE CAREFUL NOT TO BE SCALDED.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups YY3069 - Espresseria at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups YY3069 - Espresseria in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info