Manual Krups Nespresso 897 (page 17 of 50) (English, German, Dutch, Danish, French, Italian, Spanish)

480410

Zoom out

Zoom in

1/50

accessory specially designed forthis purpose.

Fit it onto the steam nozzle (19).

Please note ! This accessory must only be

used for this purpose.

• Pour about 100 ml of skimmed milk into a

small high-sided container (maximum

capacity 0.5 L) which will fit beneath the

steam nozzle.

The container as well as the milk should be

chilled (do not rinse the container in hot water

before use).

• First prepare an espresso, but only fill the

cup halfway.

• Turn the steam/hot water button to

and

press the

key (20).

The red operating control light and the green

steam control light will both flash. As soon as

the red operating control light stops flashing,

the appliance has reached the optimum

temperature for the production of steam. If

you do not actuate the steam/hot water

button in the next 2 minutes, the appliance

will return to its normal operating mode.

• Dip the steam nozzle into the container

holding the milk.

• During the preparation, keep the end of the

steam nozzle in the milk (21).

• Turn the steam/hot water button to the

position. The nozzle must not touch the

bottom of the container. Once the operation

is finished, return the button to the position

• Remove the container and swing the steam

nozzle towards the drip tray

• Repeat the steam making operation for a

moment in order to eliminate the residue of

the milk which might remain in the end of

the nozzle. Remove the cappuccino

accessory to clean it. Wipe down the steam

nozzle with a damp cloth immediately after

the frothing.

Preheating cups

For the first espresso of the day, you should

pre-heat the cups with hot water. For further

use, the cups can be pre-heated on the

warming plate.

To pre-heat cups with water, proceed as if

making an espresso but without putting a

coffee capsule in the capsule holder.

Heating liquids

• Turn the steam/hot water button

to the

position and press the key

The red operating control light and the green

steam control light will both flash. As soon as

the red operating control light stops flashing,

the appliance has reached the optimum

temperature for the production of steam. If

you do not activate the steam/hot water

button within 2 minutes, the appliance will

return to its normal operating mode.

• Immerse the steam nozzle and dip it into the

container holding the liquid. During this

operation, keep the end of the steam nozzle

in the liquid.

• Turn the steam/hot water button to the

position

(22).

Make sure that the nozzle does not touch the

bottom of the container.

• Once the operation is completed, return the

button to the

position.

• Remove the container and swing the steam

nozzle towards the drip tray.

Important:

If you want to make espresso immediately

after making a cappuccino or heating liquid,

the appliacne must be allowed to cool down

to the coffee temperature. To do this :

. Either place the capsule holder in position

without a capsule, put a container below the

coffee outlet and run about 2 cups of water

through via the coffee outler

. or wait until the red operating control light

stops flashing.

Cleaning

•Empty the water tank after each use.

• Never wash your espresso machine

accessories in the dishwasher.

ART. 897.PM6.5 18/02/04, 10:1017

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups Nespresso 897 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 0,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups Nespresso 897 Manual

Product: