361252

Krups f 893 Manual

17
Zoom out
Zoom in
Previous page
1/39
Next page
17
damp cloth each time you have used it to
make frothy milk.
Preheating cups
For the first espressos of the day, we advise
that you pre-heat the cups with very hot
water. Next time you use the machine, you
can pre-heat the cups on the appliance’s own
hotplate.
• Pre-heat the cups with very hot water :
• Turn the function selector to position
.
• Put the capsule holder in place without a
capsule and start the appliance.
• Place the cup below the capsule holder.
• Once the yellow control light has gone out,
turn the function selector to position
(17) and allow hot water to run into the
cup.
• As soon as the cup is full, turn the function
selector to position
.
Heating liquids
• Turn the function selector to position
. As
soon as the yellow indicator light goes out,
immerse the steam nozzle into the container
holding the liquid to be heated and turn the
function selector to position (18).
• Once the operation is completed, reset it to
position
.
Important:
If you want to make an espresso immediately
after making a cappuccino or heating liquid,
the appliance must first be allowed to cool
down to “coffee” temperature. To do this:
• Place the capsule holder in position without
a capsule, put a container below the coffee
outlet and run two cups of water through
via the coffee outlet.
Cleaning
• Never wash your espresso machine
accessories in the dishwasher.
• Empty the water tank after each use.
Each time you make coffee or steam, the
heating system expands (emitting a whistle)
and the water which escapes then runs into
the drip tray; so after about 20 cups of coffee,
the tray must be emptied and cleaned.
Remove the grid and clean this, too.
• Before replacing the tray and the grid, make
sure that the plastic part is correctly
positioned at the back of the drip tray (19).
The best way to clean the capsule holder is to
insert it into the machine, without a capsule,
and turn the function selector to position
.
In this way it will be cleaned under pressure.
• Reset the control to position
.
The capsule holder can be cleaned in the
dishwasher and must be cleaned at least once
a week.
• Clean the steam nozzle using a damp
sponge after each use. If the nozzle is
blocked, unscrew the pipe using a coin and
unblock the nozzle with a needle.
• When refitting the pipe, take care that the
rubber seal is correctly positioned (20).
To clean the “cappuccino” accessory, separate
parts A and C from the metal stem B (21);
clean the 3 parts in hot water. If the small
opening at the end A is blocked, you can
unblock it with a fine needle.
For more thorough cleaning, the capsule
cage can be removed:
• Unplug the appliance, remove the water
tank and the drip tray (22).
• Place the machine upside down (23).
• Unscrew the capsule cage with the special
key, anti-clockwise (24-25-26-27).
• Rinse the capsule cage thoroughly under
running water and clean the two perfora-
tions using the unblocking tool (28).
Be careful when using the unblocking
tool, as careless handling could cause
injury.
Art. 893.PM6.5 21/01/04, 11:4417
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups f 893 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups f 893 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info