690019

Krups ET3520 Manual

6
Zoom out
Zoom in
Previous page
1/45
Next page
8
■ Make sure that the filter holder (J) is inserted. Fig. 9. Insert a no. 4 filter paper for up to 10/15 cups and a
no. 6 filter for 12/18 cups. Make sure that the filter is fully open and properly in place in the filter holder.
Fig. 10.
■ It is preferable to remove the filter holder with the filter before adding the ground coffee. Should some
ground coffee be inadvertently poured into the water tank, refrain from starting the cycle and first clean the
water tank. In fact, the ground coffee could otherwise block the water circuit.
■ Add 1 KRUPS spoonful (U) of ground coffee per cup. Do not exceed 13 spoonfuls. Fig. 12.
■ Close the lid (B).
■ Press the button (K). The indicator light of the (K) button lights up to indicate that the coffee maker
has started the brewing cycle. It produces a beep. Fig. 13.
■ Once the cycle is done, your appliance produces 3 beeps and the (K)button turns off. Your coffee
maker shuts off automatically 5 minutes after the end of the cycle, i.e. 5 minutes after the tank has
completely emptied.
■ Remove the thermal jug from the coffee maker to ensure that the coffee is kept warm under ideal conditions.
■ Use the thermal jug by pressing on the lid lever to let your coffee flow. Fig. 19.
■ This thermal jug keeps coffee warm for 4 hours.
Please note:
- The quantity of coffee in the thermal jug at the end of the cycle is less than the quantity of water poured into
the water tank, since the ground coffee and the filter absorb approximately 10% of it.
- The water tank is equipped with an overflow opening at the back of the appliance. If you add too much water,
it will come out of this opening.
- To keep coffee warm longer, rinse the thermal jug with hot water prior to use, and then reclose the lid by
turning it clockwise.
- Between each use, use a new filter paper.
At any time during the brewing cycle, you can turn off the coffee maker by simply pressing the button (K).
The light on the button will also turn off. It produces 3 beeps.
Even if the brewing cycle is done, some hot liquid remains in the filter. Wait a few minutes for
the rest of the liquid to flow into the thermal jug before removing the filter.
WARNING:
- To prevent any overflow, the thermal jug must be properly placed on the base of the coffee
maker, otherwise there could be some overflow of hot water or hot coffee.
- The coffee maker becomes very hot during the brewing cycle. Please handle it with care.
5a – DELAY START (PROGRAM)
Setting the Time of the Delay Start.
■ Your appliance features a delay start program.
■ Make sure that the clock is set to the correct time. If this is not the case, follow the instructions in the section
PROGRAMMING THE CLOCK.
■ Press the PROGRAM button (L). A PROG icon and programming time appear on the display. The PROG
icon appears and the programming time blinks on the display. Fig. 14-15-16.
■ Set the time by pressing on the
H button (M) for the hours and MIN button (N) for the minutes. The time is
displayed. It is automatically confirmed after approximately 5 seconds have elapsed or by pressing on the
PROGRAM button (L).
■ Launch a delay start for which the time is already set.
- See the paragraph COFFEE PREPARATION.
- Press PROGRAM The PROG icon is displayed on the screen, as well as the time saved for the delay
start. The time is automatically confirmed after approximately 5 seconds have elapsed or by pressing on the
PROGRAM button (L).
■ When the delayed start time is set, the current time is displayed again.
5. OTHER FUNCTIONS
KR_CAFETIERE_ET35_EO_M9_NC00136850.qxp_Mise en page 1 18/11/2016 08:53 Page8
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups ET3520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups ET3520 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info