690034

Krups EA85 serie Manual

28
Zoom out
Zoom in
Previous page
1/170
Next page
30
Cleaning the "one touch cappuccino" block
To carry out this cleaning programme, you will need two containers (minimum 600 ml) and
some KRUPS cleaning liquid.
Turn the block button clockwise as far as it will go.
You can carry out the cleaning:
- By pressing the "Prog" button → Maintenance" → "Block Cleaning". Follow the instructions
on the screen.
Dismantling the "one touch cappuccino" block
In addition to rinsing, it is necessary to clean the block after each use.
To dismantle the block, follow these instructions:
Remove the plastic connection pipe from the block Fig. 14.
Press the button located above the block, which detaches it and allows you to slide it down to
unhook it Fig. 15.
Remove the settings button Fig. 16.
Remove the black plastic casing from the shell Fig. 17.
Remove the air end piece: this is the metal part located above the black plastic casing. Also
remove the plastic part from underneath Fig. 18. The block is now completely dismantled
Fig. 19.
Once the parts have been washed and dried, put them back into place, and fit the block back
onto the machine Fig. 20.
Automatic descale programme for the steam circuit
Caution: if your appliance is fitted with our Claris - Aqua Filter System cartridge, please
remove this before descaling.
The appliance will tell you when the descale programme is required. The frequency at which
this programme needs to be run depends on the quality of the water used and whether the
Claris Aqua Filter System filter is used or not (the more limescale in the water, the more
descaling is required).
Important: you do not have to perform the descale programme immediately when the
appliance requests this; however, you should do this as soon as possible. If
descaling is delayed, an alert message will remain on the screen until the
operation is performed.
Follow the instructions on-screen. It is also possible to launch descaling via the maintenance
menu.
To carry out this descaling programme, you will need a container that can hold at least 0.6 litre,
which must be placed under the One Touch Cappuccino block, and a sachet of KRUPS
descaling agent (40 g).
The automatic descale programme includes three phases: one descaling cycle and two rinse
cycles. The programme lasts approximately 20 min.
Important : if there is a power cut or you disconnect your appliance, the cycle will relaunch
the stage in progress when the incident occurred; this operation cannot be
delayed. Make sure the entire cycle is completed to remove any traces of
descaling product that may be hazardous to your health.
!
!
!
IFU_KR_EA85_EO_0A17613_EA85 10/09/13 11:33 Page30
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA85 serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA85 serie in the language / languages: English, German, Dutch, French, Italian, All languages as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info