565311
21
Zoom out
Zoom in
Previous page
1/28
Next page
46
Important: if you disconnect your machine during cleaning or in the event of a power cut,
the cleaning programme will resume the stage in progress during the incident. It
will not be possible to delay this operation. It is mandatory due to water circuit
rinse reasons. In this case, a new cleaning tablet may be required. Make sure the
entire clean programme is completed to remove any traces of descaling product
that may be hazardous to your health.
Do not place your hands under the coffee outlets during the cycle.
Automatic descale programme for the steam circuit
Caution: if your appliance is fitted with our Claris - Aqua Filter System F088 cartridge,
please remove this before descaling.
The machine will tell you when the descale programme is required. The frequency at which this
programme needs to be run depends on the quality of the water used and whether the Claris
Aqua Filter System filter is used or not (the more limescale in the water, the more descaling is
required).
Important: you do not have to perform the descale programme immediately when the
appliance requests this; however, you should do this as soon as possible. If
descaling is delayed, an alert message will remain on the screen until the
operation is performed.
You should only use KRUPS F054 descaling tablets, as the guarantee does not cover material
damage caused by the use of other products. The descaling products are available from your
KRUPS After-Sales Service.
Follow the instructions on-screen. It is also possible to launch descaling via the maintenance
menu.
Caution: the descaling cycle must be completed to comply with the guarantee condi-
tions.
To complete the descale programme you will need a container with a capacity of at least 0.6 l,
which should be placed under the steam spout, as well as a sachet of KRUPS (40g) F 054
descaler.
The automatic descale programme includes three phases: one descaling cycle and two rinse
cycles. The programme lasts approximately 20 min.
caution: water can splash during the descale or coffee circuit cleaning programmes. If
necessary, place a paper napkin on the drip tray.
Important : if there is a power cut or you disconnect your machine, the cycle will relaunch
the stage in progress when the incident occurred; this operation cannot be
delayed. Make sure the entire cycle is completed to remove any traces of
descaling product that may be hazardous to your health. Take care to protect
your work surface during the descaling cycles, in particular if it is marble, stone
or wood.
!
!
!
!
!
!
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA8400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA8400 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Krups EA8400

Krups EA8400 User Manual - German - 242 pages

Krups EA8400 User Manual - Dutch - 27 pages

Krups EA8400 User Manual - French - 28 pages

Krups EA8400 User Manual - All languages - 242 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info