565311
20
Zoom out
Zoom in
Previous page
1/28
Next page
45
EN
Emptying the coffee grounds collector, coffee drawer and the
drip tray
The drip tray collects the used water and the coffee grounds collector collects the used
coffee grounds.
The coffee drawer allows you to remove any coffee grounds below the percolation chamber.
If the message Empty the two traysis displayed, empty and clean
the drip tray.
1. Remove, empty and clean the coffee grounds collector. Fig. 21.
2. Remove the coffee drawer. Fig. 21.
Clean under water and dry well before refitting. Fig. 22.
First position the coffee drawer then the coffee grounds collector Fig.
23.
The drip tray is equipped with a float indicating when it requires emp-
tying. Fig. 24.
Circuit rinsing
You can perform a rinse at any time by pressing Prog then maintenance. Depending on the
types of recipes prepared, the machine can perform an automatic rinse when switching off.
Caution: during this rinse operation, hot water exits the coffee spout. Make sure the drip
tray is always in place even when the machine is not in use. Take care not to
burn yourself. The cycle only lasts a few seconds and will stop automatically.
Automatic clean programmes
Automatic clean programme for the coffee circuit
The machine will tell you when a clean programme is required. This clean must take place
every 360 preparations approximately.
To perform the clean programme, you will need a container with a capacity of at least 0.6 l;
this should be placed under the coffee outlets and a KRUPS cleaning tablet (XS3000).
Follow the instructions on-screen. It is also possible to launch cleaning via the maintenance
menu.
Important: you do not have to perform the clean programme immediately when the
appliance requests this; however, you should do this as soon as possible. If
cleaning is delayed, an alert message will remain on the screen until the
operation is performed. You should only use KRUPS cleaning tablets (XS
3000), as the guarantee does not cover material damage caused by the use
of other brand tablets. The cleaning tablets are available from your KRUPS
After-Sales Service.
Caution: the cleaning cycle must be completed to comply with the guarantee condi-
tions.
The automatic clean programme includes two phases: a clean and a rinse cycle; the
programme takes about 13 minutes.
GENERAL MAINTENANCE
!
!
!
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA8400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA8400 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Krups EA8400

Krups EA8400 User Manual - German - 242 pages

Krups EA8400 User Manual - Dutch - 27 pages

Krups EA8400 User Manual - French - 28 pages

Krups EA8400 User Manual - All languages - 242 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info