508528
10
Zoom out
Zoom in
Previous page
1/52
Next page
10
Description
Electrical connection
The voltage given on the specification plate must match the mains voltage.
The machine is supplied with a power cable and plug.
The plug must be connected to a properly installed electrical socket with earthing and
have a 30 mA FI fault current safety switch. The socket must have a neutral 16A fuse on
the mains side.
If an extension cable is used, it must have an earth line that is properly
connected to the plug connections. The lines in the extension cable must
have a cross section of at least 1,5 mm². The plug connections must be of
spray protected design and may not lie on a wet surface. (If the extension
cable is longer than
10 m the minimum cross section is 2,5 mm²)
Important!
Extension cables that are too long cause a drop in the voltage and thus interruptions in
operation. If you are using a cable drum, the cable must always be fully unwound.
are also on the machine.
1. Connect the high pressure hose with the spray gun and lance to the machine.
2. Connect the water supply and turn on the tap.
3. Connect to the electrical supply.
4. Switch on the machine with the spray gun open and start the washing procedure.
5. When using the machine as a cold water high pressure cleaner:
ignition "OFF"
6. When using the machine as a hot water high pressure cleaner:
ignition "ON"
7. When using the machine as a hot water high pressure cleaner: preselect the water
temperature ("target" temperature) using the "+" und "-" buttons. The current water
temperature is shown in the "ACTUAL" display field.
8. A blinking "OIL" display on the temperature control panel indicates that there is
less than the minimum required quantity of heatng oil, and that the oil tank must be
refilled.
High pressure hose line and spray equipment
The high pressure hose line and spray equipment supplied with the machine are made
of high quality material specially adapted for the operating conditions of the machine, and
are properly marked.
Quick operating instructions
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle Therm 1165 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle Therm 1165 in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle Therm 1165

Kranzle Therm 1165 User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info