508528
8
Zoom out
Zoom in
Previous page
1/52
Next page
Description
The thermostat controls the temperature of the
spray water. The target temperature is set using
two press-buttons (nos. 3 + 4) and can be read
from the top display (no. 1). If a button is held
down for longer, the target temperature setting
increases quickly in increments of 5°C.
The last temperature setting used remains
stored after the machine is switched off and
automatically becomes the default temperature
when the machine is switched back on.
The current spray temperature can be read from
the bottom display (no. 2).
When the machine is switched on, both displays show the figure "888" for approx 1
second to check the functioning of the units.
The thermostat also monitors the fuel level in the tank by means of a float switch. If
the fuel level falls below the minimum required quantity, the thermostat switches the
oil burner off and the word "OIL" blinks in the target temperature display window (no.
1). If the top display shows the letters "FLA" this indicates a malfunction in
combustion.
Thermostat
2
3
4
1
Safety information
IMPORTANT!
For safety reasons, the master switch must be put in the "0" position (ie,
the power must be switched off) after the washing process has been
completed.
At the start of the washing process the high pressure stream must be directed for at
least 30 seconds at the object being cleaned. It is possible for the water content
(approx. 5 l) of the combustion chamber to discolour during periods of disuse.
Description
The thermostat controls the temperature of the
spray water. The target temperature is set using
two press-buttons (nos. 3 + 4) and can be read
from the top display (no. 1). If a button is held
down for longer, the target temperature setting
increases quickly in increments of 5°C.
The last temperature setting used remains
stored after the machine is switched off and
automatically becomes the default temperature
when the machine is switched back on.
The current spray temperature can be read from
the bottom display (no. 2).
When the machine is switched on, both displays show the figure "888" for approx 1
second to check the functioning of the units.
The thermostat also monitors the fuel level in the tank by means of a float switch. If
the fuel level falls below the minimum required quantity, the thermostat switches the
oil burner off and the word "OIL" blinks in the target temperature display window (no.
1). If the top display shows the letters "FLA" this indicates a malfunction in
combustion.
Thermostat
2
3
4
1
Safety information
IMPORTANT!
For safety reasons, the master switch must be put in the "0" position (ie,
the power must be switched off) after the washing process has been
completed.
At the start of the washing process the high pressure stream must be directed for at
least 30 seconds at the object being cleaned. It is possible for the water content
(approx. 5 l) of the combustion chamber to discolour during periods of disuse.
The thermostat controls the temperature of the
spray water. The target temperature is set using
two press-buttons (nos. 3 + 4) and can be read
from the top display (no. 1). If a button is held
down for longer, the target temperature setting
increases quickly in increments of 5°C.
The last temperature setting used remains
stored after the machine is switched off and
automatically becomes the default temperature
when the machine is switched back on.
The current spray temperature can be read from
the bottom display (no. 2).
When the machine is switched on, both displays show the figure "888" for approx 1
second to check the functioning of the units.
The thermostat also monitors the fuel level in the tank by means of a float switch. If
the fuel level falls below the minimum required quantity, the thermostat switches the
oil burner off and the word "OIL" blinks in the target temperature display window (no.
1). If the top display shows the letters "FLA" this indicates a malfunction in
combustion.
Thermostat
2
3
4
1
Safety information
IMPORTANT!
For safety reasons, the master switch must be put in the "0" position (ie,
the power must be switched off) after the washing process has been
completed.
At the start of the washing process the high pressure stream must be directed for at
least 30 seconds at the object being cleaned. It is possible for the water content
(approx. 5 l) of the combustion chamber to discolour during periods of disuse.
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle Therm 1165 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle Therm 1165 in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle Therm 1165

Kranzle Therm 1165 User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info