508528
9
Zoom out
Zoom in
Previous page
1/52
Next page
Safety Information
Safety Information
Important!!!
The machine must be disconnected from the power supply when
servicing work is being carried out. The master switch should be in
position "0" and the plug out of the socket.
The machine may only be used by persons who have received the necessary training.
* Never operate the machine without supervision.
* The water spray can be dangerous. It should never be directed at people, animals,
electrical apparatus or the machine itself.
* Never direct the spray at power sockets.
* Parts of the machine interior and parts of the gun and lance become hot when hot water
is used. Leave the cover of the machine closed when using the machine and do not
touch the metallic parts of the gun and lance.
* Children must not be allowed to use high pressure cleaning equipment.
* Do not damage the cable or repair it incorrectly.
* Do not pull the high pressure hose if there are kinks or loops in it. Make sure that the hose
is not damaged on sharp edges.
* Persons operating the machine should wear the necessary protective clothing, ie, water-
proof clothing, rubber boots, safety goggles, headwear etc.
* The high pressure spray can generate a high level of noise. If noise exceeds the maximum
allowed levels, users and others in the vicinity must wear suitable ear protection.
* The high pressure spray causes recoil and additional twisting movement if the gun is
angled. The gun must therefore be held firmly with both hands.
* Do not close off the exhaust aperture on the topside of the machine. Do not bend over this
aperture and do not put your hands inside it. Exhaust gases are very hot!
* Do not clamp down the trigger of the gun. Apply the safety catch after use, in order to
prevent accidental spraying.
* Do not spray against matter containing asbestos or other hazardous substances.
* Never spray liquids containing solvents, such as paint thinner, petrol, oil, or anythng
similar. Note the specifications of the additive makers! The seals in the machine are not
resistant to solvents. The spray vapour of solvents is highly inflammable, explosive and
poisonous.
* The machine may not be set up and used in rooms where there is a danger of fire or
explosion. The machine may not be used underwater.
* Air is required for combustion, and exhaust fumes are generated. If the machine is used
in closed rooms, make sure that the exhaust fumes can escape and that there is adequate
ventilation.
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle Therm 1165 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle Therm 1165 in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle Therm 1165

Kranzle Therm 1165 User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info