668580
24
Zoom out
Zoom in
Previous page
1/108
Next page
24
5: PREV .................................... Shows the previous page.
6: MIDI CH .................. [1...16] Specifies the MIDI channel for each
switch.
7: TYPE ............... [CC, NOTE] Specifies the MIDI message for each
switch.
CC : A MIDI control change message will be
transmitted when you operate the switch.
NOTE: A MIDI note message will be transmitted
when you operate the switch. When you
turn the switch on, a note-on message
with the maximum velocity will be trans-
mitted. When you turn the switch off, a
note-off message will be transmitted.
8: BEHAVIOR .. [TOG, MOM] Specifies the operation mode for each
switch.
TOG: Toggle operation. Each time you press the
switch, it will alternately turn on or off.
MOM:
Momentary operation. The switch will be
on only while you are holding down it
down, and will turn off when you release it.
PAD A–D
Here you can specify the MIDI control messages that are transmitted when
you operate the touch pad.
You can separately specify messages for the X-axis, Y-axis, and touch.
1: NEXT .................................... Shows the next page.
2: NO. ......................... [0...127] Assigns a control change message to each
controller.
3:MIN ......................... [0...127] For X and Y, this specifies the minimum
value of the control change message for
each controller.
TOUCH specifies the control change value
that will be transmitted when Off occurs. If
you've selected "NOTE" as the type, this is
fixed at note-off.
4:MAX ........................ [0...127] For X and Y, this specifies the maximum
value of the control change message for
each controller.
TOUCH specifies the control change value
that will be transmitted when Off occurs. If
you've selected "NOTE" as the type, this
specifies the note-on velocity value.
5: PREV .................................... Shows the previous page.
6: MIDI CH .................. [1...16] Specifies the MIDI channel of the touch
panel. The MIDI channel you specify here
is used for the X-axis, Y-axis, and Touch.
7: TYPE ............... [CC, NOTE] (Shown only for TOUCH) Specifies the
MIDI message for Touch.
CC: A MIDI control change will be transmit-
ted when you touch the pad.
NOTE: A MIDI note-on message will be transmit-
ted when you touch the pad. When you
touch the panel, a note-on message with
the maximum velocity will be transmit-
ted. When you release the panel, a note-
off message will be transmitted.
8: BEHAVIOR .. [TOG, MOM] (Shown only for TOUCH) Specifies the
operation mode for Touch.
TOG: Each time you touch the pad, the On and
Off states will alternate.
MOM: The On message will be transmitted
when you touch the panel, and the Off
message will be transmitted when you re-
lease it.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Zero 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Zero 8 in the language / languages: English, German, French as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info