488479

Korg SoundLink DRS 1212 I-O Manual

23
Zoom out
Zoom in
Previous page
1/58
Next page
System Configurations
Korg 1212 I/O 19
English
Setting the word clock source on an ADAT system
ADATs have three settings for word clock source: “Digital,” “Internal,” and
“External.”
Digital means that they sync to an external clock through their optical or 9-
pin inputs, if they are connected to another ADAT optical device (such as
the 1212 I/O); if there are no other devices connected, then they use their
internal clock.
Internal means that they use their internal clock, regardless of any signal at
the optical input.
External will only appear if the ADAT is connected to a BRC, or another
ADAT sync master (such as the Mark Of The Unicorn MIDI Timepiece AV).
In a multi-device system without the Alesis BRC, the first device (the unit
that displays “Id 1” at startup) will have been designated the word clock
master at startup, and this is the only one you need to change. The rest of
the devices will automatically be set to slave to the master through their
digital inputs.
When using the Alesis BRC, you do not need to make any settings on the
ADATs themselves (they’ll automatically be set to External); instead, the
BRC controls the word clock of the connected ADATs. See below for
instructions on working with the BRC.
ADAT XT, Fostex CX-8, Panasonic MDA-1 (without BRC)
On the ADAT XT, Fostex CX-8, and Panasonic MDA-1, both the word clock
source and the sample rate are set using the Clock Source button on the
front panel. The current Clock Source setting is shown in the lower right-
hand side of the fluorescent display. Pressing the button repeatedly toggles
through the four choices: INT 48kHz, INT 44.1kHz, DIG 48kHz, and DIG
44.1kHz. “INT” is Internal, and “DIG” is Digital.
If the ADAT is providing the master clock source, the sample rate (48kHz
or 44.1kHz) will control the entire system, including the 1212 I/O. If the
tape is not formatted for the current sample rate, the sample rate may flash
in the display, and the front-panel clock may not be correct, but otherwise
everything will be fine; please see your ADAT manual for details.
If DIG is selected, the on-screen “DIG” indicator will flash if there is a
problem with the signal at the ADAT’s optical input (such as no cable
connected, or invalid word clock).
Original ADAT (without BRC)
On the original ADAT, hold the “SET LOCATE” button, and then press
“DIGITAL IN.” This toggles the ADAT between “int” (Internal) and “dig”
(Digital). This is a little tricky, since you cannot see the setting without
changing it. Press the buttons until you see the desired setting.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg SoundLink DRS 1212 I-O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg SoundLink DRS 1212 I-O in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg SoundLink DRS 1212 I-O

Korg SoundLink DRS 1212 I-O User Manual - German - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info