488479

Korg SoundLink DRS 1212 I-O Manual

21
Zoom out
Zoom in
Previous page
1/58
Next page
System Configurations
Korg 1212 I/O 17
English
Make sure that the program’s sample rate matches the external clock
source
When you record or play back audio data using external clock sources
(such as the S/PDIF, ADAT, or Word Clock inputs), the sample rate is
controlled entirely by the external source, and not by the digital audio
program’s sample rate parameter. Because of this, you must make sure that
the external clock source is actually set to the same sample rate as the
digital audio program. If the two are different, it can result in audio playing
back faster or slower than expected.
For more information, see “Audio playback is slightly slow, or slightly
fast,” on page 50.
Connecting the 1212 I/O to an ADAT system
The 1212 I/O will work equally well in a system with only one ADAT, or in
a more complex system with multiple ADATs and a remote controller, such
as the Alesis BRC. When the 1212 I/O is used in a system with multiple
ADATs, it should always be connected to the last ADAT in the chain.
In this manual, by the way, we’ll use the term ADAT to refer to any ADAT-
compatible multitrack recorder, such as the Alesis ADAT and ADAT XT, the
Fostex RD-8 and CX-8, and the Panasonic MDA-1.
To connect the 1212 I/O to an ADAT system:
1. Connect the ADATs together as usual, with the sync and optical
outputs from ADAT #1 going into ADAT #2, from ADAT #2 to
ADAT #3, and so on.
2. Connect the ADAT Timecode Conditioner to the 1212 I/O’s ADAT
sync input.
3. Connect the sync output from the last ADAT to the 1212 I/O’s ADAT
Timecode Conditioner.
4. Connect the optical outputs from the last ADAT to the optical inputs
of the 1212 I/O.
5. Connect the optical output of the 1212 I/O to the optical input of
ADAT #1.
6. If using an Alesis BRC, connect the BRC’s sync output to ADAT #1’s
sync input, and then connect the Word Clock output of the 1212 I/O
to the 48kHz Input of the BRC.
This connection is necessary when recording from the 1212 I/O’s S/PDIF
input.
7. For general use, set the 1212 I/O’s word clock source to ADAT, and
the ADAT system’s word clock source to Internal.
For more information, see “Setting the word clock source on an ADAT
system,” on page 19.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg SoundLink DRS 1212 I-O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg SoundLink DRS 1212 I-O in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg SoundLink DRS 1212 I-O

Korg SoundLink DRS 1212 I-O User Manual - German - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info