Manual Korg SoundLink DRS 1212 I-O (page 24 of 58) (English)

488479

Zoom out

Zoom in

1/58

System Configurations

20 Korg 1212 I/O

English

NOTE: The original ADAT defaults to “dig” at power-on.

BRC (with either original ADAT or ADAT XT)

When using the BRC with either original ADATs or ADAT XTs, the BRC

supplies the word clock to the ADAT system. The BRC can use its internal

word clock, or word clock from its 48kHz input. This is controlled by the

Clock Source parameter, under the EXT SYNC button. Once the Clock

Source has been set, you can enable or disable external sync by pressing the

EXT SYNC button, and the button’s light will toggle on and off accordingly.

To set the BRC to use its internal clock, simply make sure that the EXT

SYNC button’s light is off. (EXT SYNC also controls SMPTE

synchronization; if you need to use this feature, make sure that the Clock

Source is set to Internal.)

To set the BRC to use a word clock from the 1212 I/O, set the Clock Source

to 48kHz Input, and then turn on EXT SYNC. Connect the word clock

output of the 1212 I/O to the 48kHz Input on the back of the BRC.

Special note: ADAT timecode synchronization and clock source

When using ADAT timecode sync with the original ADAT (without BRC),

the ADAT must be the master clock source (1212 I/O set to ADAT, and

ADAT set to Internal). The 1212 I/O clock source cannot be set to either

S/PDIF•Word Clock or Internal.

With using ADAT timecode sync with the ADAT XT, the 1212 I/O’s clock

source may be set to either ADAT or S/PDIF•Word Clock. If the 1212 I/O’s

clock source is set to ADAT, set the ADAT to Internal; if the 1212 I/O is set

to S/PDIF•Word Clock, set the ADAT to Digital.

When using ADAT timecode sync with a BRC-controlled ADAT system

(with either original ADATs or ADAT XTs), it is the same as with the ADAT

XT: the 1212 I/O’s clock source may be set to either ADAT or

S/PDIF•Word Clock. See the notes under “BRC (with either original ADAT

or ADAT XT),” above.

These restrictions apply only to digital audio recording using ADAT

timecode.

Recording and playback without ADAT timecode work well with all

1212 I/O clock settings.

A few words on word clock

Whenever two or more audio devices are connected together digitally, they

are sending and receiving thousands of individual bits of data every

second.The bits are sent out continuously, one after another, at a very

steady pace. This is similar to two jugglers passing balls between each

other, while at the same time keeping up their own steady juggling

patterns.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg SoundLink DRS 1212 I-O in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg SoundLink DRS 1212 I-O

Korg SoundLink DRS 1212 I-O User Manual - German - 67 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg SoundLink DRS 1212 I-O Manual

Product: