488479

Korg SoundLink DRS 1212 I-O Manual

14
Zoom out
Zoom in
Previous page
1/58
Next page
Installation
10 Korg 1212 I/O
English
one end, which connects to the 1212 I/O, and fans out to a pair of female
RCA connectors. One of these connectors is white, and labeled “In,” while
the other is yellow, and labeled “Out.”
S/PDIF stands for “Sony/Philips Digital Interface.” The S/PDIF format
carries two channels of digital audio, and is commonly used for
transferring stereo signals between DAT recorders, digital signal
processors, digital musical instruments, and so on.
S/PDIF input.
The white RCA connector, labeled “In,” is the S/PDIF input.
You can connect this to the S/PDIF output of a DAT, signal processor,
sampler, and so on. Please use high-quality, shielded, 75-ohm cables
manufactured specifically for video or digital audio.
The 1212 I/O can accept either 16 or 20 bit audio data via the S/PDIF input.
S/PDIF output.
The yellow RCA connector, labeled “Out,” is the S/PDIF
output. You can connect this to the S/PDIF input of a DAT, signal
processor, sampler, and so on. Please use high-quality, shielded, 75-ohm
cables manufactured specifically for video or digital audio.
The 1212 I/O can transmit either 16 or 20 bit audio data via the S/PDIF
output.
❻
Word Clock and ADAT Sync breakout connector
This connector should only be used with the special Word Clock and ADAT
breakout cable included with the 1212 I/O. This cable has a 6-pin mini-DIN
connector at one end, which connects to the 1212 I/O, and fans out to a pair
of female BNC connectors, one yellow and one white, and the ADAT 9-pin
D-sub sync connector.
ADAT sync input.
This 9-pin connector receives timecode from the ADAT
system. 1212 I/O-compatible digital audio software can use this to
synchronize recording and playback with a connected ADAT system.
Connect this to the ADAT Timecode Conditioner (described below) and
then to the ADAT’s sync out port. If you have multiple ADATs in your
system, connect this to the sync output of the last machine in the chain.
Word Clock input.
The white BNC connector, labeled “In,” is the Word
Clock input. This allows the sample rate of the 1212 I/O to be controlled by
an external device. Connect this to the word clock output of the master
clock source.
The Word Clock input requires a shielded, video-quality cable (75-ohm or
greater impedance) with BNC connectors. This type of cable is different
from those commonly used in analog audio applications, but is readily
available at professional audio and video dealers.
Word Clock output.
The yellow BNC connector, labeled “Out,” is the Word
Clock output. This allows the 1212 I/O to control the sample rate of an
external device; it will always echo the currently selected Clock Source (see
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg SoundLink DRS 1212 I-O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg SoundLink DRS 1212 I-O in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg SoundLink DRS 1212 I-O

Korg SoundLink DRS 1212 I-O User Manual - German - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info