488479

Korg SoundLink DRS 1212 I-O Manual

16
Zoom out
Zoom in
Previous page
1/58
Next page
System Configurations
12 Korg 1212 I/O
English
System Configurations
This chapter is intended to provide a quick guide for integrating the
1212 I/O into a variety of different setups. By its nature, the instructions
here are brief; for additional detail, please consult the manuals of the other
digital audio hardware and software being used.
Word clock settings
The great majority of technical support questions regarding the 1212 I/O
are the result of incorrect word clock settings. Incorrect word clock settings
may cause subtle degradation of audio, louder pops and clicks, altered
playback speeds, and/or timecode problems.
Keeping track of the word clock source may seem confusing at first, but it’s
really pretty simple. Just remember that, as with SMPTE synchronization
setups, there must be one and only one word clock master, with all other
devices set to slave to the master device. This means that you need to keep
track of the word clock settings on all of your digital audio devices–not just
on the 1212 I/O.
Using only the 1212 I/O’s analog input and output
The 1212 I/O can be used as a stand-alone analog I/O card, without any
digital connections. In this case, set the 1212 I/O’s word clock source to
Internal.
S/PDIF devices (DAT, effects, etc.)
There are two broad classifications of S/PDIF devices: those which can use
an external clock to control their digital output, and those which cannot.
These two types require different settings on the 1212 I/O.
Devices which do not accept external word clock
Many S/PDIF devices don’t have a separate setting for the word clock
source. For instance, many DAT machines automatically use incoming
digital audio data as the word clock source when recording, and
automatically use the internal clock source when playing back. Some
stand-alone A/D converters also may not accept an external word clock.
When recording from such devices, all the other devices must slave to the
S/PDIF device’s clock.
1. Connect the digital audio cables between the S/PDIF input and
output of the 1212 I/O and the S/PDIF device.
2. When recording from the S/PDIF device into a digital audio
program, set the 1212 I/O’s word clock source to S/PDIF•Word
Clock.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg SoundLink DRS 1212 I-O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg SoundLink DRS 1212 I-O in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg SoundLink DRS 1212 I-O

Korg SoundLink DRS 1212 I-O User Manual - German - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info