668721
64
Zoom out
Zoom in
Previous page
1/94
Next page
58
Knob [1]
FrmntSft (Formant Shift) [–2…+2]
Shifts the cutoff frequencies of each of the
carrier’s band pass filters. This will signifi-
cantly change the character of the vocoder
output.
Knob [2]
FcOffset (Fc Offset) [–63...+63]
This continuously shifts the cutoff fre-
quency of each band-pass filter (Synthesis
filter) of the carrier.
37. FILTER
Here you can adjust the settings for the carrier’s sixteen band-pass filters and modulator’s envelope filter. You’ll be using these parameters
frequently, since they play an important role in determining the character of the vocoder.
Knob [3]
Vcd Reso (Vocoder Resonance)
[000...127]
Specifies the amount of resonance for each
band-pass filter of the carrier.
Increasing this value will emphasize the
regions near each cutoff frequency.
Knob [4]
E.F.Sens [000...126, Hold]
Specifies the sensitivity of the modulator’s
Envelope Followers. Lower settings of this
value will allow the attacks of the input sig-
nal to be detected more rapidly.
If you set this to Hold, the character of the
signal that is being input at that moment
will be held (Formant Freeze). Subse-
quently, the sound will retain that charac-
ter regardless of whether there is any in-
put.
If you set this to Hold when there is
no input signal present, there will be
no output even if an audio signal is
subsequently input.
If you write the program with this
value set to Hold, the program will
memorize the response of the signal
that was being held.
“FrmntSft” and “FcOffset”
When “FrmntSft”=0 and “FcOffset”=0, the response of the carrier filters will match the
cutoff frequency of the modulator filters. The filter response is shifted upward or down-
ward in two discrete steps by the “FrmntSft.” This can be adjusted upward or down-
ward a total of another two steps by using “FcOffset,” giving you a total of four steps of
adjustment upward or downward.
Cutoff (range in which BPF 8 will change)
0 +63-63
BPFBPFBPFBPF BPFBPF
BPFBPFBPFBPF BPFBPF
897
897
Frequency
Frequency
Formant Shift:+2
Cutoff (range in which BPF 8 will change)
0
+63
-63
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg R3 in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info