668721
63
Zoom out
Zoom in
Previous page
1/94
Next page
57
36. MODULATOR-B
As in the 35. Mod-A page, this page lets you make additional settings for the modulator.
The parameters in this page have no effect if formant motion is on (FORMANT MOTION [ON/OFF] key lit).
Knob [1]
GateSens (Gate Sensitivity) [000...127]
Specifies the speed at which the gate will
operate according to the “Threshld” set-
ting.
Lower values for this setting will make the
gate close more quickly, causing the vo-
coder sound to decay more quickly.
Higher values for this setting will make the
gate close more gradually, causing the vo-
coder sound to have a longer decay.
If the “Threshld” value is high, this
effect will apply more readily. If the
threshold value is 0, there will be no
effect.
Knob [2]
Threshld (Threshold) [000...127]
Sets the level at which the input source will
be cut. By setting this to an appropriate
level you can cut the noise that might be
present during times of no input. Higher
settings will make it more likely that the
input source will be cut.
With excessively high settings, there
will be more chance that the audio in-
put signal itself will be cut, making it
difficult for you to apply the vocoder
effect as intended.
Knob [3]
HPF Gate [Disable, Enable]
Specifies whether the high-frequency por-
tion of the signal from AUDIO IN 1 that is
mixed into the vocoder output will be
passed only during the key-on (note-on)
duration, or will always be allowed to pass.
Disable: The high-frequency portion of the
signal will always be passed. This is effec-
tive when you are playing a guitar etc. that
is connected via an effect unit to [AUDIO
INPUT 2] jack.
Enable: The high-frequency portion of the
signal will be passed only during the key-
on (note-on) duration. Use this setting if
you are applying the vocoder effect only
to an internal sound source, or if you have
connected a synthesizer etc. to [AUDIO
INPUT 2] jack. (The signal will be passed
when a MIDI note-on is received.)
Knob [4]
HPF Lvl (HPF Level) [000...127]
This adjusts the output level from the HPF
(High Pass Filter) that extracts the high-fre-
quency components from the modulator
input source; these high-frequency compo-
nents are then mixed into the output of the
vocoder. Increase this value if you want to
emphasize the consonants of the vocal in-
put source.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg R3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg R3 in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info