707337
85
Zoom out
Zoom in
Previous page
1/103
Next page
MIDI
85
•Expression (CC#11) [Bn, 0B, vv]
When expression messages are received, the volume of a timbre will be
controlled. The volume will be at maximum if the maximum value (127) is
received, and at zero if the minimum value (0) is received.
Damper pedal (CC#64) [Bn, 40, vv]
Incoming damper pedal messages will turn the timbre’s damper effect
(Hold) on/off (0: Off, 127: On).
Portamento (CC#65) [Bn, 41, vv]
When portamento messages are received, the portamento effect of a tim-
bre will be switched on/off. If the portamento time is set to 0, there will be no
portamento effect. (0: off, 7F: on)
All note off (CC#123) [Bn, 7B, 00] (value is 00)
When an All Note Off message is received, all currently-sounding notes of
that channel will be turned off. Some sound may linger due to the envelope
settings.
All sound off (CC#120) [Bn, 78, 00] (value is 00)
When an All Sound Off message is received, all notes currently sounding
on that channel will be silenced. While All Note Off allows the decay of a
note to continue, the All Sound Off will silence the sound immediately. How-
ever, this message is intended for use in emergencies, and is not for use
during a performance.
Reset all controllers (CC#121) [Bn, 79, 00] (value is 00)
When a Reset All Controllers message is received, all controller values cur-
rently operating on that channel will be reset. Some parameters assigned
using Virtual Patch will not be reset.
Using a control change as a virtual patch modulation source
By selecting CC#cc (cc=00–95, 102–119) as the “SOURCE” for MIDI1,
MIDI2, or MIDI3 in the PATCH page, you can use control changes as a
modulation source for a virtual patch, vocoder “FC.MOD.SRC,” or effect
parameter. The actual value of 0–127 will be used without change as the
modulation source.
Assigning a control change to a knob or button
In the CC MAP page, you can assign the control changes CC#00–CC#95
and CC#102–CC119 to principal parameters that correspond to panel
knobs and buttons. When you operate an assigned knob or key, the corre-
sponding control change will be transmitted. When that control change is
received from an external device, the result will be the same as if that knob
or key had been operated with the corresponding value. (J p. 90 “4.Front
panel knob/button control change assignments”)
MIDI
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg microKORG XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg microKORG XL in the language / languages: English as an attachment in your email.

The manual is 8,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info