707337
83
Zoom out
Zoom in
Previous page
1/103
Next page
MIDI
83
Using the external MIDI device as master and the microKORG XL
as slave
Connect the microKORG XL’s MIDI IN connector to your external MIDI
device’s MIDI OUT connector.
Use knob [1] to select the MIDI page, use knob [2] to select “CLOCK,” and
use knob [3] to select “EXT MIDI”; the microKORG XL will be the slave.
Set your external MIDI device to transmit MIDI clock messages (as the
master device). The microKORG XL’s arpeggiator will operate at the
tempo of the external device (e.g., sequencer or rhythm machine).
NOTE
If you set the MIDI page “CLOCK” parameter to “AUTO,” the
microKO-
RG XL
will automatically operate with the EXT MIDI setting whenever
MIDI clock data is being received at the MIDI IN connector. At other
times, the
microKORG XL
will operate with the INTERNAL setting.
NOTE
If the
microKORG XL
receives a MIDI Start message [FA] when it is syn-
chronized to the MIDI clock of an external MIDI device, the arpeggiator
will be reset. Also, the phase of the LFO will be reset if “KEY SYNC” is
OFF.
2. MIDI messages
MIDI channels
MIDI uses sixteen channels (1–16). MIDI messages can be transmitted and
received when the channel of the receiving device matches the channel of
the transmitting device.
This setting will affect the way in which channels are handled.
If “VOIC.MODE” is SINGLE, LAYER, or SPLIT
If the COMMON page “VOIC.MODE” setting is SINGLE, LAYER, or SPLIT,
MIDI data is transmitted/received on the global MIDI channel.
If “VOIC.MODE” is Multi
If the COMMON page “VOIC.MODE” setting is MULTI, MIDI data for timbre
1 is transmitted/received on the global MIDI channel. MIDI data for timbre 2
is transmitted/received on the MIDI channel specified by the COMMON
page “T2MIDI.CH” setting. Other transmission/reception uses the global
MIDI channel.
NOTE
The global MIDI channel is the basic MIDI channel used by the
mi-
croKORG XL
to transmit and receive MIDI data. It is specified by the
MIDI page setting “MIDI CH”.
Note-on/off
Note-on [9n, kk, vv], Note-off [8n, kk, vv]
(n: channel, kk: note number, vv: velocity)
When you play the keyboard of the microKORG XL, note-on/off messages
are transmitted. The note-off velocity is transmitted at a fixed 64, but is not
received.
If the GLOBAL page “POSITION” is POST KBD, note-on/off messages will
be transmitted by the arpeggiator when it is running.
MIDI
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg microKORG XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg microKORG XL in the language / languages: English as an attachment in your email.

The manual is 8,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info