707422
65
Zoom out
Zoom in
Previous page
1/73
Next page
61
1-2. INIT LEVEL ( )
Initializing CH LEVEL A/B
You can access this function if a vocoder
program is selected.
This will simultaneously initialize the
output levels of the eight band-pass filter
channels for the carrier (SYNTHESIS
FILTER). When you initialize the levels,
all output levels will be set to 127.
Procedure
1
Hold down the SHIFT key and press
the 1 key.
The display will indicate "
."
2
Press the blinking 1 key.
The output levels will be initialized,
and then the microKORG S will return
to its normal state.
If you decide to cancel, press the lit
SHIFT key.
2-2. INIT PAN ( )
Initializing CH PAN A/B
You can access this function if a vocoder
program is selected.
This will simultaneously initialize the pan
of the eight band-pass filter channels for
the carrier (SYNTHESIS FILTER). When
you initialize the pan settings, each filter
channel will be set to Center.
Procedure
1
Hold down the SHIFT key and press
the 2 key.
The display will indicate "
."
2
Press the blinking 2 key.
The pan settings will be initialized, and
then the microKORG S will return to its
normal state.
If you decide to cancel, press the lit
SHIFT key.
1
2
1, 3
Enable ( ):
MIDI control changes will be
transmitted and received.
[3] knob: PITCH BEND
Selects whether pitch bend messages
will be transmitted and received.
Disable (
):
Pitch bend messages will not be
transmitted or received.
Enable (
):
Pitch bend messages will be
transmitted and received.
[4] knob: SYSTEM EXCLUSIVE
Selects whether MIDI system
exclusive messages will be transmit-
ted and received.
Disable (
):
MIDI system exclusive messages will
not be transmitted or received.
Enable (
):
MIDI system exclusive messages will
be transmitted and received.
3
When you have finished making
settings, press the lit 4 key or the
SHIFT key. The microKORG S will
return to its normal state.
4-1. MIDI FILTER ( )
MIDI Filter
These settings specify whether the
corresponding types of MIDI data will be
received and transmitted.
Procedure
1
Hold down the SHIFT key and press
the 4 key.
The display will indicate "
."
2
Turn the appropriate knob 14 to make
the desired settings.
[1] knob: PROGRAM CHANGE
Selects whether program changes will
be transmitted and received.
Disable (
):
Program changes will not be transmit-
ted or received.
Enable (
):
Program changes will be transmitted
and received.
[2] knob: CONTROL CHANGE
Selects whether MIDI control changes
will be transmitted and received.
Disable (
):
MIDI control changes will not be
transmitted or received.
1
1, 2
1
1, 2
Initializing CH LEVEL and CH PAN –VOCODER
MIDI Filter
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg microKORG S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg microKORG S in the language / languages: English as an attachment in your email.

The manual is 6,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg microKORG S

Korg microKORG S User Manual - German - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info