707422
67
Zoom out
Zoom in
Previous page
1/73
Next page
63
6-1. MIDI DATA DUMP ( )
Data dump
Data dump
"Data dump" is a function that transmits
program or global data in the form of
MIDI exclusive data, so that it can be
saved on a connected MIDI data filer or
computer. This can also be used to
transmit data to another microKORG S
unit.
Do not touch the knobs or keyboard of
the microKORG S while data is being
transmitted or received. Also, never
turn the power off during this time.
Some USB-MIDI interface devices may
not be able to transmit/receive the
microKORG S's MIDI exclusive
messages.
Transmission procedure
1
Connect the microKORG S's MIDI OUT
connector to the MIDI IN connector of
a device that is able to receive a MIDI
data dump, and set both devices to the
same MIDI channel.
2
Hold down the SHIFT key and press
the 6 key.
The display will indicate "
."
3
Turn the 1 knob to select the type of
data dump that will be transmitted.
1Program (
):
Data for the currently selected program
will be transmitted.
Program (
):
Data for all programs will be
transmitted.
Global ( ):
Global data will be transmitted.
(p.58)
All (
):
All programs and global data will be
transmitted.
The 6 key will begin blinking.
If you decide to cancel, press the lit
SHIFT key.
4
Press the blinking 6 key.
The data dump will be executed, and
then the microKORG S will return to its
normal state.
If you did not select a data dump to be
transmitted, the 6 key will remain lit. If
you attempt to transmit by pressing
2 3
2, 4
the 6 key in this state, the display will
indicate "---" and the data dump will
not be executed.
Reception procedure
Use the following procedure when you
want to return previously-saved data
from a connected MIDI data filer or
computer back to the microKORG S, or to
receive data from another microKORG S
unit.
1
Connect the microKORG S's MIDI IN
connector to the MIDI OUT connector
of the device that will transmit the
MIDI dump data.
2
Set the MIDI channel of the transmit-
ting device to match the microKORG
S's MIDI channel. If you previously
transmitted data to an external MIDI
device and want to receive it into the
microKORG S, set the microKORG S's
MIDI channel to the same setting as
when it originally transmitted the data.
3
Set the SHIFT function MIDI FILTER
"SYSTEM EXCLUSIVE" to Enable.
(p.61)
Turn "WRITE PROTECT" OFF (p.64).
4
Transmit the data from the MIDI data
filer or other device. For the transmis-
sion procedure, refer to the manual of
the device you are using.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg microKORG S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg microKORG S in the language / languages: English as an attachment in your email.

The manual is 6,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg microKORG S

Korg microKORG S User Manual - German - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info