707422
64
Zoom out
Zoom in
Previous page
1/73
Next page
60
SHIFT functions
1-1. COPY TIMBRE ( )
Copying a timbre
You can access this function only if a
synth program is selected.
Timbre settings from another program
will be copied to the timbre of the
currently selected program. In the case of
a Layer program, the settings of the
currently-edited timbre will be copied.
You cannot execute this function if a
vocoder program is selected as the
copy-source program (2). ("
":
Error)
Procedure
1
Hold down the SHIFT key and press
the 1 key.
The display will indicate "
."
2
Turn knobs 1 and 2 to select the copy-
source program (A.11–d.88).
The 1 key will begin blinking.
If you decide to cancel this operation,
press the lit SHIFT key.
3
Press the blinking 1 key. The timbre
copy will be executed, and then the
microKORG S will return to its normal
state.
If you have not selected a copy-source
program (
2
), the 1 key will remain lit.
If in this state you press the 1 key to
attempt to execute, the display will
indicate "
," and the copy will not
be executed.
3-1. INIT PROGRAM ( )
Initializing a program
This function initializes the settings of the
currently selected program.
If you execute this on a synth program, it
will be set as a Single program.
Procedure
1
Hold down the SHIFT key and press
the 3 key.
The display will indicate "
."
2
Press the blinking 3 key. The program
will be initialized, and then the
microKORG S will return to its normal
state.
If you decide to cancel, press the lit
SHIFT key.
Copying and exchanging timbres
–SYNTH
/ Initializing a program
By holding down the SHIFT key and pressing the appropriate key, you can perform various utility functions.
While a SHIFT function is being used, the SYNTH and VOCODER LEDs will both light. If you press the lit
SHIFT key at this time, you will exit these functions and return to normal operation.
1
1, 3
2
1
1, 2
2-1. SWAP TIMBRE ( )
Exchanging timbres
You can access this function only if a
Layer synth program is selected.
This will exchange the settings of timbres
1 and 2 within the currently selected
program.
You cannot execute this if a Single
synth program is selected. (The display
will indicate "
": Error.)
Procedure
1
Hold down the SHIFT key and press
the 2 key.
The display will indicate "
."
2
Press the blinking 2 key. The timbre
exchange will be executed, and then the
microKORG S will return to its normal
state.
If you decide to cancel, press the lit
SHIFT key.
1
1, 2
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg microKORG S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg microKORG S in the language / languages: English as an attachment in your email.

The manual is 6,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg microKORG S

Korg microKORG S User Manual - German - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info