707422
62
Zoom out
Zoom in
Previous page
1/73
Next page
58
Saving Data
Saving a program
Saving GLOBAL, MIDI,
and SHIFT function
settings
Saving your edited settings
Settings that will be saved
•All parameters VOICE–ARPEG.B
(FORMANT HOLD key on/off)
ARPEGGIATOR ON/OFF key
OCTAVE SHIFT UP, DOWN keys
Procedure
1
Press the WRITE key.
The currently selected program number
will blink in the display. The WRITE
key LED will also blink, and the SHIFT
key LED will light.
If the display blinks " " (Protect)
when you press the WRITE key, the
write protect setting is turned on, so
that programs cannot be written. Press
the SHIFT key to return to the normal
state, and turn write protect off.
(p.64)
Settings saved when the microKORG S is
turned off (Global data)
GLOBAL parameters other than AUDIO
IN THRU
All MIDI parameters
SHIFT functions
MIDI FILTER, CONTROL CHANGE,
WRITE PROTECT
2
Select the program number where you
want to save the current program
settings.
Use the PROGRAM SELECT BANK
SIDE key, the PROGRAM SELECT
dial, and the PROGRAM NUMBER
keys to select the program number
where you want to save the current
program settings. The display will
indicate the save-destination number.
If you decide to cancel without saving,
press the lit SHIFT key.
Since an initialized program is in side
d as the factory default, we recom-
mend selecting side d as the location
for saving your edited programs.
3
Press the WRITE key once again to
save the data (execute the Write
operation).
The display will indicate "
," and
the data will be written. Then the
microKORG S will return to the normal
operating state.
If you have edited a program, your edited settings will be lost if you turn the power off or select another
program before saving (writing). If you want to use the edited program later, you must save (write) it.
Changes made to settings of the Favorites mode, GLOBAL and MIDI parameters and the SHIFT
functions listed below will automatically be saved (written) when the microKORG S is turned off.
When the battery charge is low, " " appears in the display and you will not be able to save your data.
In this case, connect the AC adapter or replace the batteries; then adjust the setting again and save it.
Never turn off the power while data is being written. Doing so may destroy the data.
Writing program data
1, 32 22
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg microKORG S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg microKORG S in the language / languages: English as an attachment in your email.

The manual is 6,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg microKORG S

Korg microKORG S User Manual - German - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info