707401

Korg KingKorg Manual

20
Zoom out
Zoom in
Previous page
1/116
Next page
20
KingKORG Owner’s manual
About global settings
Switch to Global mode when you want to change settings that apply to
the entire KingKORG or when you want to make MIDI‐related settings.
Global mode contains various settings such as master tune,
transpose, and global MIDI channel. (PG: “5. GLOBAL parameters”)
Changes you make to these settings will be lost if you turn off
the power without saving. Be sure to save your settings if you
want to keep them. (OM: p.21 “1. Saving global settings”)
Other functions
1. Initializing a program
Here’s how to initialize the settings of the selected program.
This procedure will initialize the settings of the that’s being
edited program. It will not change the contents stored in
internal memory.
If you want to save the initialized state, save the program.
(OM: p.21 “2. Saving a program”)
1. Select the program that you want to initialize. (OM: p.13
“Selecting a program”)
2. Use the PAGE +/- buttons to access the PROGRAM “u01:
Utility” page, and press the value dial.
A screen will ask you to confirm that you want to initialize the
program.
TIP:
If you decide not to initialize, press the SHIFT/EXIT buon.
3. Press the value dial once again.
When initialization is finished, the display will indicate
“Complete!” and you will automatically return to the top screen.
2. Copying a timbre
Here’s how you can copy the settings of another program’s timbre to
a timbre (either A or B) of the currently selected program.
This operation recalls settings to a timbre of the program that’s
being edited . It will not change the contents stored in internal
memory.
Only one timbre can be copied at a time.
1. First select the program that includes the copy-destination
timbre. (OM: p.13 “Selecting a program”)
2. Use the PAGE +/- buttons to access the PROGRAM “u02:
Utility” page, and press the value dial.
3. Turn the value dial to select the program that contains the
copy-source timbre, and press the dial to confirm your selection.
When selecting a program, the TIMBRE A or B select button will
light depending on the timbres used by the copy‐source
program.
The TIMBRE A or B select buttons will not respond if you
press them at this time.
4. Confirm the copy-source timbre.
If the copy‐source program uses two timbres, the copy‐source
timbre button will blink. Select the desired timbre if necessary,
and press the value dial to confirm your selection.
TIP:
While the TIMBRE A or B select buon is blinking, you can
also make your choice by pressing a buon.
5. Confirm the copy-destination timbre.
If the copy‐destination program uses two timbres, the TIMBRE
A or B select button will blink. As necessary, turn the value dial
to select the copy‐destination timbre, and press the value dial to
confirm your selection.
6. A confirmation screen will appear in the main display; verify
the settings, and press the value dial.
When the copy is completed, the display will indicate
“Complete!” and you will return to the top screen of the “u02:
Utility” page.
TIP:
If you want to save the copied state, save the program. (OM:
p.21 “2. Saving a program”)
TIP:
You can press the SHIFT/EXIT buon to return to the previous
step. If you decide not to copy a timbre, press the SHIFT/EXIT
buon several times.
3. Restoring the factory settings
Here’s how to restore the KingKORG’s programs and global data
settings to their factory‐set condition. The factory settings are called
the “preload data.” To return to the factory‐set state, execute the
Load Preload operation.
When you execute Load Preload, the factory set data will
overwrite the data you’ve saved in internal memory. Make
sure that you don’t mind losing this data.
Do not touch the KingKORG’s knobs or keyboard while the
Preload operation is in progress. Never turn off the power
during this process.
Of factory‐set programs 1–300, programs 201–300 (programs
containing no preset data) will not return to their factory‐set
state. If programs are saved in these locations, they will remain
in that state.
You can’t execute the Load Preload operation if memory
protect is turned on. Turn off memory protect before you
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg KingKorg at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg KingKorg in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 32,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info