500314

Korg ESX-1 Manual

83
Zoom out
Zoom in
Previous page
1/108
Next page
83
7. Global mode
7. Global mode
In Global mode you can set parameters such as metronome
settings, overall tuning, memory protect, etc. To enter Global
mode, press the GLOBAL key. To exit Global mode, press
a different mode key.
If you turn off the power without writing the settings
you make in Global mode, your changes will be
discarded. If you want to keep the changes you
made, perform the Write operation (☞p.84 “Saving
your Global mode settings”).
Setting the metronome
These controls allow you to specify how the metronome will
operate. The metronome is convenient when you are using
realtime recording to create patterns.
The metronome will sound at quarter-note intervals. Except
for when you have selected the “On➝3/4” setting, the sound
of metronome is output from line out jacks L/R and from
the headphone jack, mixed with the sound of the ESX-1’s
playback and audio input.
1. Press the [
] key until the parameter display reads
“Metronom.”
2. Turn the dial to make the desired metronome set-
ting.
METRONOME ..... [Off, Rec0, Rec1, Rec2, On,
On➝3/4]
Off The metronome will not sound.
Rec0 The metronome will sound only during
recording (when REC and PLAY/CAN-
CEL keys are lit)
Rec1 When you start recording, there will be a
one-measure count before recording ac-
tually begins. The metronome will sound
only during recording.
Rec2 When you start recording, there will be a
two-measure count before recording ac-
tually begins. The metronome will sound
only during recording.
On The metronome will sound during play-
back or recording. There will be no count
before recording begins.
On➝3/4 During playback or recording, the met-
ronome will be output from individual
out jacks 3/4. (The metronome will not
be output from the line out L/R jacks or
the headphone jack.) There will be no
count before recording begins.
You cannot write the metronome setting. When the
power is turned on, it will always be “Off.”
Setting the input jack to mono/
stereo
AUDIO IN MODE ...................L/Mono, Stereo
This specifies whether the sound that is input to
the audio in jack will be monaural (left channel
only) or stereo. Select “L/Mono” if you are using a
monaural source such as a mic. Select “Stereo” if
you are using a stereo source such as a CD player.
1. Use the [
]/[ ] cursor keys to make the display
read “AudioIn.”
2. Turn the dial to select “L/Mono” or “Stereo.”
Even if Audio In Mode is set to stereo, sampling
will record the mixed sound of the left and right
input channels if the Sampling Mode (☞p.21 “Sam-
pling”) is monaural. If you set Audio In Mode to ste-
reo, use a stereo 1/4" phone plug to make connec-
tions.
Exchangeing the arpeggiator
functions
This setting switch the functions of the arpeggiator slider
and ribbon controller.
1. Use the [ ]/[ ] cursor keys to make the display
reads “ArpCntrl.”
2. Turn the dial to select “Normal” or “Revers”
ARP CONTROL....................... Normal, Revers
Normal Slider: Pitch control (keyboard parts)
Ribbon: Gate time (keyboard, audio in
parts) / Resolution (drum, slice, stretch
parts) + Note-on
Revers Slider: Gate time (keyboard, audio in
parts) / Resolution (drum, slice, stretch
parts)
Ribbon: Pitch control (keyboard parts) +
Note-on
Protecting the data in memory
This setting lets you protect the Pattern mode and Song mode
data.
Use the [ ]/[ ] cursor keys to select “Protect” in the pa-
rameter display. Turn the dial to select Off or On.
PROTECT........................................... Off, On
On The WRITE/RENAME key will be dis-
abled, and it will be impossible to rewrite
data or receive MIDI data dumps.
Off Edited data can be saved, and data
dumps can be received.
With the factory settings this is turned On.
The memory protect setting applies to Pattern mode, Part
Edit mode, Step Edit mode, and Song mode. However,
you can write your settings in Global mode regardless
of the memory protect setting.
… 83 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg ESX-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg ESX-1 in the language / languages: English as an attachment in your email.

The manual is 3,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info