500314
81
Zoom out
Zoom in
Previous page
1/108
Next page
81
6. Song mode
Event recording
Recording song event data
In addition to letting you arrange patterns to create a song, the ESX-1’s Song mode
also lets you record your realtime performances using the drum pad keys, the
keyboard function, the arpeggiator, and knob operations.
Recording your Song mode performance and operations in this way is referred
to as Event Recording.
Event Recording can record the following six types of data (event data).
•Your performance on the drum, stretch, slice, and audio in part keys
•Your performance using the Keyboard function
•Your performance using the arpeggiator
Your knob movements and key operations (only for the selected part)
Solo and mute operations for the parts
•Tempo
To record using Event Recording
When using Event Recording, you can record repeatedly over the same region,
and layer more of the above-listed data on each “pass” of recording. Event Re-
cording will replace (overwrite) only the previously-existing data that is the same
type of event as the newly recorded data. Existing events of other types will re-
main.
1. Select the song on which you want to use Event Recording.
2. Use the [ ]/[ ] cursor keys to select “Position” in the display.
3. Use the dial or the select keys to move to the position where you
want to start recording.
4. Press the REC key, and then press the PLAY/PAUSE key to start
Event Recording.
5. Operate the step keys or knobs etc. to record your performance.
6. Press the STOP/CANCEL key to stop Event Recording.
If the performance data of the song conflicts with event data, the
event data will be given priority for playback.
Knob movements recorded in Song mode using Event Recording
are played back in a way equivalent to the SMOOTH mode of a mo-
tion sequence (not TRIG HOLD mode).
If you want to save the data that was recorded by Event Recording,
you must perform the Write operation.
Event data may not play back correctly if you rewind the song.
If you operate an event-recorded knob during playback, event data of that
knob will be cancelled until playback arrives at the next position.
To erase event data from a song
You can erase event data from a song by holding down the SHIFT
key and pressing and holding the RESET/ERASE key for the region
that you want to erase. All event data in that region will be erased
from the song.
To check the event data in a song
When you hold down the SHIFT key and press the MOTION SEQ
key of the part common section, step keys 15 and 16 will light if
event data is recorded in the song, and the display will indicate
“SongEvnt” to show the number of events recorded in the currently
selected song.
You cannot check event data in this way during playback or record-
ing.
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg ESX-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg ESX-1 in the language / languages: English as an attachment in your email.

The manual is 3,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info