500314

Korg ESX-1 Manual

82
Zoom out
Zoom in
Previous page
1/108
Next page
82
Saving a song
If you want to keep the song data that you have created, you must perform this
Write/Rename operation. If you don’t want to keep the song you created, sim-
ply switch songs without performing Write/Rename.
Be aware that when you save a song, the song that had previously
occupied the save-destination will be overwritten.
To simply save the song
1. Press the WRITE/RENAME key.
The parameter display will indicate “WriteTo,” and the value dis-
play will indicate “(the save-destination song number).”
At this time you can press the SHIFT key to change the display from
“(the save-destination song number)” to the corresponding “(six char-
acters of the Song name).”
To overwrite onto a different song
Use the dial to change the song number to the desired save-destina-
tion. Be sure to select a song number that does not contain impor-
tant data you want to keep.
2. Press the WRITE/RENAME key to begin saving. The WRITE/RE-
NAME key will light while the data is being saved, and will go dark
when the operation is completed. If you decide to cancel, press the
STOP/CANCEL key.
When the data has been saved, the save-destination song number
will be selected.
To rename and save the song
1. Hold down the shift key and press the WRITE/RENAME key once
(the key will blink). The parameter display will indicate “Rename,”
and the value display will show “(six characters of the song name)”
2. Assign a name to the song. Use the [ ]/[ ] cursor keys to move
the cursor in the value display to the left or right, and turn the dial
to edit the character. You can assign a name of up to eight characters
to a song, however only six at a time are visible during naming.
When you have finished, press the WRITE/RENAME key.
3. Select the song number where you want to save the song. The pa-
rameter display will indicate “WriteTo,” and the value display will
show “(the save-destination song number).” If you now press the shift
key, the “(save destination song number)” will change to show “(six
characters of the song name).” Turn the dial to select the song number
where you want to store the song, and make sure that you will not
be overwriting an important song that you want to keep.
4. Press the WRITE/RENAME key once again to begin saving the data.
The key will light while the data is being saved, and will go dark
when saving is completed. If you decide to cancel, press the STOP/
CANCEL key.
With the factory settings, the Memory Protect setting is turned on,
so the data will not be saved. Turn the Global mode Memory Protect
setting off before you execute this operation ( ☞p.83 “Protecting the
data in memory”).
Never turn off the power while data is being saved to memory (i.e.,
while the WRITE/RENAME key is lit). Doing so can destroy the data.
… 82 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg ESX-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg ESX-1 in the language / languages: English as an attachment in your email.

The manual is 3,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info