508723
22
Zoom out
Zoom in
Previous page
1/31
Next page
SPEED DOME CAMERA 

APPENDIX I:
DIP SWITCH SETTINGS
This is the guides for setting protocol, baud rate, dome address, video cable type, resistor jumper and
alarm output.
DIP Switches’ position
The corresponding Dip-switches’ positions are
shown below:
:
Red LED Green LED
Reset Button
Protocol and baud rate setting
SW1 is for protocol and baud rate settings.
Bits 1~6 of SW1 are for protocol setting and
bits 7~8 are for baud rate setting as shown in
the chart below
Default setting is 4800 bps.
Switch Digits
Baud
Rate
1
2
3
4
5
6
7
8
2400
OFF OFF
4800
ON OFF
9600
OFF ON
19200
ON ON
Reset Button
This button is for resetting the dome
after changing the dipswitch setting.
The new setting works only after reboot
finishes.
Led
Flashing green light means control
commands reach the dome.
Red light is on when effective command
This model of speed dome supports multi-protocol.
The set-ting chart is shown below.
Switch Number
Protocol 1 2 3 4 5 6 7 8
ERNITEC
YAAN ON
ALEC ON
PELCO_PD ON ON
PELCO_C ON
VCL ON ON
MOLYNX ON ON
VICON ON ON ON
DIAMOND ON
KALATEL ON ON
HUNDA ON ON
LILIN ON ON ON
SANTACHI ON ON
PELCO_PDC ON ON ON
UNIVISIONV1* ON ON ON
UNIVISIONV2* ON ON ON ON
AD* ON
ADT ON ON
PANASONIC ON ON
PHILIPS* X X X X X ON
Reserved4
Reserved5
Reserved6
Reserved7
Reserved8
Reserved9
Reserved10
Reserved11
Reserved12
Reserved13
Reserved14
Reserved 15
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic SEC-CAM901 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SEC-CAM901 in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info