780528

Kona 2013 Manual

13
Zoom out
Zoom in
Previous page
1/42
Next page
KONA OWNER’S MANUAL
13
Once the saddle is at the correct
height, make sure that the seatpost
does not project from the frame
beyond its “Minimum Insertion” or
“Maximum Extension” mark [Fig. 4].
If your bike is a Supreme Operator,
Operator, Entourage DL or Entourage,
it has an interrupted seat tube.
You must also make sure that
the seat post is far enough into
the frame so that you can touch
it through the bottom of the
interrupted seat tube with the tip
of your nger without inserting
your nger beyond its rst knuckle
[see Fig. 5].
WARNING: If your seat
post projects from the frame
beyond the Minimum
Insertion or Maximum
Extension mark [see Fig.
4] or you cannot touch the
bottom of the seat post
through the bottom of the
interrupted seat tube with
the tip of your nger without
inserting your nger beyond
its rst knuckle [see Fig. 5],
the seat post may break,
which could cause you to lose
control and fall.
2. Front and back adjustment. The saddle can be adjusted
forward or back to help you get the optimal position
on the bike. Ask your dealer to set the saddle for your
optimal riding position and to show you how to make this
adjustment. If you choose to make your own front and
back adjustment, make sure that the clamp mechanism
is clamping on the straight part of the saddle rails and is
not touching the curved part of the rails, and that you are
using the recommended torque on the clamping fastener(s)
(see the manufacturer’s instructions).
3. Saddle angle adjustment. Most people prefer a horizon-
tal saddle; but some riders like the saddle nose angled up
or down just a little. Your dealer can adjust saddle angle
or teach you how to do it. If you choose to make your
own saddle angle adjustment and you have a single bolt
saddle clamp on your seat post, it is critical that you loosen
the clamp bolt sufciently to allow any serrations on the
mechanism to disengage before changing the saddle’s
angle, and then that the serrations fully re-engage before
you tighten the clamp bolt to the recommended torque
(see the manufacturer’s instructions).
WARNING: When making saddle angle adjustments
with a single bolt saddle clamp, always check to
make sure that the serrations on the mating surfaces
of the clamp are not worn. Worn serrations on the
clamp can allow the saddle to move, causing you to
lose control and fall. Always tighten fasteners to the
correct torque. Bolts that are too tight can stretch and
deform. Bolts that are too loose can move and fatigue.
Either mistake can lead to a sudden failure of the bolt,
causing you to lose control and fall.
NOTE:
If your bicycle is equipped with a suspension seat
post, the suspension mechanism may require periodic
12
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kona 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kona 2013 in the language / languages: English as an attachment in your email.

The manual is 3.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info