Manual Kona 2013 (page 12 of 42) (English)

780528

Zoom out

Zoom in

1/42

KONA OWNER’S MANUAL

B) SADDLE POSITION

Correct saddle adjustment is an important factor in

getting the most performance and comfort from your

bicycle. If the saddle position is not comfortable for you,

see your dealer, who has the tools and skill to change it.

The saddle can be adjusted in three directions:

1. Up and down adjustment.

To check for correct

saddle height [Fig. 3]:

• sit on the saddle;

• place one heel

on a pedal;

• rotate the crank until

the pedal with your heel

on it is in the down posi-

tion and the crank arm is

parallel to the seat tube.

If your leg is not

completely straight and

just touching the center

of the pedal, your saddle

height needs to be adjusted. If your hips must rock for the

heel to reach the pedal, the saddle is too high.

If your leg is bent at the knee with your heel on the pedal,

the saddle is too low.

Ask your dealer to set the saddle for your optimal riding

position and to show you how to make this adjustment. If you

choose to make your own saddle height adjustment:

- loosen the seat post clamp

- raise or lower the seat post in the seat tube

- make sure the saddle is straight fore and aft

- re-tighten the seat post clamp to the recommended

torque (see the manufacturer's instructions)

A) STANDOVER HEIGHT

1. Diamond frame

bicycles

Standover height is the

basic element of bike t.

It is the distance from

the ground to the top

of the bicycle’s frame at

that point where your

crotch is when straddling

the bike. To check

for correct standover

height, straddle the bike

while wearing the kind

of shoes in which you’ll

be riding, and bounce

vigorously on your

heels. If your crotch touches the frame, the bike is too big

for you. Don’t even ride the bike around the block. A bike

which you ride only on paved surfaces and never take

off-road should give you a minimum standover height

clearance of two inches (5 cm). A bike that you’ll ride on

unpaved surfaces should give you a minimum of three

inches (7.5 cm) of standover height clearance. And a bike

that you’ll use off road should give you four inches

(10 cm) or more of clearance.

2. Step-through frame bicycles

Standover height does not apply to bicycles with step-

through frames. Instead, the limiting dimension is

determined by saddle height range. You must be able

to adjust your saddle position as described in B without

exceeding the limits set by the height of the top of the

seat tube and the ”Minimum Insertion” or “Maximum

Extension” mark on the seat post. 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kona 2013 in the language / languages: English as an attachment in your email.

The manual is 3.93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kona 2013 Manual

Product: